Instruction/ maintenance manual of the product RB265PXV Whirlpool
Go to page of 24
BUILT-IN OVEN S$zf-Faning RB265PXV (Shown) RB266PXV (White).
Contents Page BEFORE YOU USE YOUR OVEN 2 IMPORTANT SAFETY INSTRUCTIONS 3 PARTSANDFEATURES 4 USING YOUR OVEN 5 Electronic MEALTIMER* Clock 5 Setting the Electronic Clock 6 Using the Electronic Minute Timer 7 Using the Oven Controls 8 Baking,.
IMPORTANT SAFETY INSTRUCTIONS 1. DO NOT allow children to use or l let steam and hot air escape play with any part of the oven or from the oven before removing leave them unattended near it load to prevent burns. They could be burned or injurea 4. DO NOT use the oven to heat a 2.
Parts and features Models RB265PXV and RB ELECTRONIC MEALTIMER* EVEN LIGHT SWITCH OVEN VENT COVER PANEL 3 ----.-...-..V “.L,. LIGHT SWITCH MODEL AND SERIAL NUMBER PLATE OVEN RACK GUIDE BROIL ELEMENT . . ‘1 . . -w-m ---.“#.,I.” -- ~--- --_...-,.
OVEN “HEATING” OVEN TEMPERATURE SELECTOR SIGNAL LIGHT CONTROL “LOCKED”/ SIGNAL LIGHT Using the oven OVEN “ON” SIGNAL LIGHT The Electronic MEALTIMER* Clock The electronrc MEALTIMER* Clock handles [many different types of functions.
- For settings from IO-99 minutes, the Display will increase in 1 minute increments. l When using the Bake Hour:; ana;or Stow ‘~me. the Display shows hours and minutes. Two-hours and fifteen Eleven-hour and fifty-nine minutes. ~lnutes Other operating hints may be found oc page 14.
Using the Electronic Minute Timer The Minute Timer does not start or stop the oven. It works like a kitchen timer It can be set in minutes and seconds up to 99 minutes. You will hear beeps when the set time is up. 1. Push in the Min/Sec Timer Button. The Signal Light will come on and the Display will show “O:OO? 2.
Using the Oven Controls Baking . Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. 2. Set the Oven Selector on BAKE. The “on” Signal Light will come on. 4. Put food in the oven. NOTE: Oven racks, walls and door will be hot.
Adjusting the Oven Temperature Control Does your oven seem hotter or colder than i;,ouz old oven? The temperature of your old oven may have shifted gradual,v wrthout you noticing the change. Your new oven IS properly adjusted to prov,de accurate temperatures, But when comparing to your old oven, the new desrc;-1 may give you different results.
Broiling I Position the rack before turning the oven on. See “Broil Char-t’ in the Cooking Guide or a reliable cookbook for recommended rack positions. 3. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm]. The door will stay open by itself 2.
Using the Electronic Automatic MEALllMER* Clock The electronic MEALTIMER’ Clock is designed to turn the oven on and off at times you set, even if you are not around Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
7. When the baking time is com- plete, the oven will beep for 1-2 minutes. To stop, push the Bake Hours Button. Turn the Oven Selec- tor and Oven Temperature Control to OFF 8.
7. Set the clock for the length of baking time you want: Push in the Bake Hours Button, then turn the Set Knob until the length of baking time you want shows in the Display. This example shows 2 hours, 15 minutes. Bake Hours can be set for up to 11 hours.
Other Operating Hints l If you want to check what you have proyrammed, press the button forthe function you want to check. The Display dill show what you have programmed for that function l If you want to check the time of day, pre ,s the Min/Sec Timer and Bake Hours Buttons.
1. Pull knobs straight off 3. Wash control knobs in warm soapy water. Rinse well and dry. 2. Use warm soapy water or spray glass cleaner and a soft cloth to wipe the control panel. Rinse and wipe dry 4. Push control knobs straight back on. Make sure they point to OFF.
lising the Self-Cleaning c‘,xLe The Self-Cleanrng cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how ‘-j use the Self-Cleaning cycle safely. Before You Start 1. Clean the shaded areas by hand They do not get hot enough during the Self-Cleaning cycle for soil to burn away.
Setting the Controls Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will help normal smoke and heat to disappear from the room as quickly as possible. 1. Set the Oven Selector and Oven Temperature Control on CLEAN. The “on” Signal Light will come on 2.
6. Turn the Oven Selector and Oven Temperature Control to OFF. The “on” Signal Light will go off 7. After the oven is cool, wipe off any residue or ash with a damp cloth.
How It Works During the Self-Cleaning cycle. the oven gets much hotter than it does for baking or broiling...approximately 875 F 1468 C). This heat breaks up grease and soil and burns it off. This graph shows approximate temperaLies and times during a Self- Cleaning cycle for 3 hours.
Cleaning Chart PART Oven exterior WHAT TO USE Warm soapy water and a soft cloth Plastic scrubbrng pad for stubborn spots HOW TO CLEAN l Wipe off regularly when range is cool. l Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk] to remain on surface.
The Oven Light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel. Push it again to turn off the light. 2. Remove the bulb cover in the back of the oven by pulling out and pushing the wire holder to the side.
If you need service or assistance, we suggest you follow these five steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix yourself without tools of any kind. It nothing operates: l Is the oven wired into a lrve clrcult with the proper voltage? (See In- stallation Instructions.
3. If you need service*... Whirlpool has a nationwide network of fran- TECff-CARE Companies TECH-CARE serv FRANCHISED SERVlCE ice technicians are trained to fulfill the product war- ranty and provide after-warranty service, anywhere in the United States.
r LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSP” replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by a franchised TECH-CARE 7 service company. WHIRLPOOL WILL NOT PAY FOR A.
An important point after buying a device Whirlpool RB265PXV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RB265PXV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RB265PXV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RB265PXV you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RB265PXV will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RB265PXV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RB265PXV.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RB265PXV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RB265PXV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
