Instruction/ maintenance manual of the product LI31HC/W10526058F Whirlpool
Go to page of 32
36" (91.4 CM) ISLAND-MOUNT CANOP Y RANGE HOOD Installation Instr uctions and Use & Care Guide For questions about fe atures, operation/perf ormance, parts, accessori es or service, call: 1-800-253-1301 or visit our website at www .whirlpool.c om In Canada, call 1-800-807-6777 or visit o ur website at www .
2 T ABLE OF CONTENTS RANGE HOOD SAFETY ................................. ................................ 2 INSTALLATION REQUIREMENTS .............................. .................. 4 Tools and Parts .. ................................... ..........
3 IMPOR T ANT SAFETY INST RUCTION S READ AND SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: ■ Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
4 INSTALLATION REQUIREMENTS T ools and Parts Gather the requir ed tools and part s before starting installation. Read and follow the instructions pr ovided with any tool s listed here. T ools needed ■ Level ■ Drill with 1¼" (3.0 cm), ³⁄₈ " (9.
5 Product Dimensions * V ented installati ons only ** Non-vented (r ecirculating) instal lations only Installation Dimensions IMPORT ANT : Minimum distance “C”: 24" (61.0 cm) from electric cooking surface, 27" (68.6 cm) fr om gas cooking surface Suggested maximu m distance “C”: 36" (91.
6 V enting Methods This island hood is factory se t for venting through the r oof. A 6" (15.2 cm) round ve nt system is needed f or installation (not included). The hood exhaust opening is 6" (15.2 cm) round. NOTE: Flexible vent is not r ecommended.
7 INSTALLATION INSTR UCTIONS Prepare Location ■ Lay out the vent duct system be fore installing the ran ge hood to determine the best ro uting for the ve nt duct. ■ It is recommended that the ve nt system be installed befor e the range hood is installed.
8 Assemble Range Hood 1. Install transition on top of hood (if removed for shipping) with 2 - 3.5 x 9.5 mm sheet metal screws. 2. Position the 4 vertical support s (A) with the notches at the bottom and attach to the range h ood using 16 - 4.2 x 8 mm screws.
9 Mak e Electr ical Connection 1. Disconnect power . 2. Remove terminal box cover . 3. Remove the knockout in the te rminal box and install a UL listed or CSA approved ¹⁄₂ " strai n relief. 4. Run home power supply cable th rough strain r elief, into terminal box.
10 Install Duct Co vers NOTE: Remove the film fr om the duct covers. 1. Assemble the upper duct covers together and install the duct covers around the support frame. The larger hole in t he flanges of the upper duct cove r must be outside the smaller hole in the mating flange of the other upper duc t cover .
11 6. Install the lower duct cover (rear) to the range hood canopy . Spread the lower duct cover opening slightly and position it over the upper duct cover . Set the lower duct cover in place. Position so the flanges of the lower duct cover set into the flanges of the upper duct cover .
12 RANGE HOOD USE The range hood is designed to re move smoke, cooking vapors an d odors from the cooktop area. For bes t results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.
13 RANGE HOOD CARE Cleaning IMPORT ANT : Clean the hood and gr ease filters frequently according to the following instructions. Replace grease filters before operating hood. Exterior Surfaces: T o avoid damage to the exterior surface , do not use steel wool or soap-filled scouring pads.
14 WIR ING DIAGRAM L N G BK WH YL/GN WH YL/GN RD WH BR BK BU YL Push Button Switch 2 1 L 3 L La BK YL YL YL YL SE123C M BR WH YL BK RD WH GY N BK RD WH YL/GN BU YL BR YL/GN BU GY BK RD WH YL BR SWITCH.
15 ASSISTANCE OR SER VICE If you need service Please refer to the warranty page in this manual. If you need rep lacement parts If you need to or der replacemen t parts, we recommend that you use only factory specified part s.
16 1/14 WHIRLPOOL ® MAJOR APPLIANCE LIMITED W ARRANTY A TT A CH Y OUR RECEIPT HERE. PR OOF OF PURCHASE IS REQUI RED T O OBT AIN W ARRANTY SER VICE. Please hav e the follo wing information availab le .
17 SÉCUR ITÉ DE LA HOTTE DE CUISINIÈRE Risque possible de décès ou de blessure grave si vous ne suivez pas immédiatement les instructions. Risque possible de décès ou de blessure grave si vous ne suivez pas les instructions.
18 IMPORTANTES INSTRUCTIONS DE SÉCURITÉ LIRE ET CONSERVER CES INSTRUCTIONS AVERTISSEMENT : POUR RÉDUIRE LE RISQUE D'INCENDIE, CHOC ÉLECTRIQUE OU DOMMAGES CORPORELS, RESPECTER LES INSTRUCTIONS SUIVANTES : ■ Utiliser cet appareil uniquement dans les applications envisagées par le fabricant.
19 EXIGENCES D'INSTALLATION Outils et pièces Rassembler les outils et pièces nécessai res avant d’entrepr endre l’installation. Lire et observer les instructions fournies avec chacun des outils de la liste ci -dessous.
20 Dimensions du produit * Installation avec décharge à l’extérieur uniquement ** Installation san s décharge à l’extérie ur (recyclage) uniquement Dimensions d’installation IMPORT ANT : V.
21 Installations dans une région à clima t froid Dans le cir cuit d'évacuation, on devrait installe r un clapet anti- reflux additionnel pour minimiser le r eflux d' air froid, ainsi qu'un élément d'isolation therm ique po ur minimiser le transfert de chaleur par conduction vers l'extérieur .
22 ■ Si le domicile possède un câbl age en aluminium, suivre la procédur e ci-dessous : 1. Raccorder une section de câ ble en cuivr e massif aux conducteurs en queue de cochon.
23 4. Fixer le support horizontal supé rieur à l'aide de s 4 vis à b ois de 5 x 45 mm. REMARQUE : Les vis du support horizontal supérieur doivent être vissées dans une st ructure de sout ien du plafond capable de soutenir une charge de 80 lb (36,6 kg).
24 2. Installer 16 vis de 4,2 x 8 mm et les fixer . Raccord ement du circuit d’évacuation 1. Installer le circ uit d’évacuation. 2. Enfoncer le conduit sur la bouche d'évac uation. Utiliser des brides de conduit pour assur er l'étanchéité de toutes le s connexions.
25 Installation des cache-conduits REMARQUE : Enlever la pellicule des cache-conduits. 1. Assembler les parties supéri eures des cache-conduits ensemble et install er les cache-conduits autour du cadre de support.
26 6. Installer la partie inférieure du cache-conduit (a rrière) à l'auvent de la hotte de cuisiniè re . É ca rt e r l a p a rtie i nférieure du cache-conduit en l'ouvrant légèrement et la positionner sur la partie supérieur e du ca che-conduit.
27 UTILISATION DE LA HOTTE La hotte de cuisinière est conçue pour extraire fumée, vapeurs de cuisson et odeurs de la zone de la table de cuisson. Pour obtenir les meilleurs résultat s, mettre le v.
28 ENTRETIEN DE LA HOTTE Nettoy ag e IMPORT ANT : Nettoyer fréquemment la hotte et les filtres à graisse en suivant les inst ructions suivantes. Réinst aller les filtres à graisse avant de faire fonctionner la hotte.
29 SCHÉMA DE CÂBLAGE Ph1 Neu T erre N BL JA/VE BL JA/VE R BL MAR N BU JA Commutateur du bouton-poussoir 2 1 L 3 L La N JA JA JA JA SE123C M MAR BL JA N R BL GY N N R BL JA/VE BU JA MAR JA/VE BU GRIS.
30 ASSISTANCE OU SER VICE Si vous avez besoin de servic e Consulter la page de ga rantie du présent manuel. Si vous avez besoin de pièc es de rechange Si vous avez besoin de commander des pièces de rechange, nous vous recommandons d'utiliser seulement des pièces spécifiées par l'usine.
31 1/14 GARANTIE LIMITÉE DES GR OS APPAREILS MÉNAGERS WHIRLPOOL ® A TT A CHEZ ICI VO TRE REÇU DE VENTE. UNE PREUVE D’A CHA T EST OBLIGA T OIRE POUR OBTENIR L'AP PLICA TION DE LA GARANTIE.
W10526058F ©2014. All rights reserved. Used under license in Canad a. Tous droits réservés. Utilisé sous licence au Canada. 12/14 Printed in Mexico Imprimé au Mexique.
An important point after buying a device Whirlpool LI31HC/W10526058F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool LI31HC/W10526058F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool LI31HC/W10526058F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool LI31HC/W10526058F you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool LI31HC/W10526058F will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool LI31HC/W10526058F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool LI31HC/W10526058F.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool LI31HC/W10526058F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool LI31HC/W10526058F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
