Instruction/ maintenance manual of the product LE6150XS Whirlpool
Go to page of 16
Use & Care Guide Cycle control knob and temDerature Start button Lint screen Dryer drum ading door Drum light (not shown) CUSTOMIZED SERIES LARGE CAPACITY AUTOMATIC DRYERS LE6150XS LG6151XS.
Contents Page important Safety instructions .................... .3 Additional safety instructions and your responsibilities ............................................. 3 Operating Instructions Stating your dryer ....................................
Important Safety Instructions To reduce the risk of fire, electrical shock, or injury to persons when using your dryer, follow basic precautions, including the following: l Read ail instructions before using the l DO NOT tamper with the controls. dryer.
Operating Instructions Starting your dryer Be sure to refer to the chart below and the Dryer Guide for proper sorting, loading and control setting information before starting your dryer. NOTE: Do not overdry. Overdrying can cause shrinkage, static cling, and damage some fabrics.
1. Select a cycle by turning the Cycle Control Knob either way. Stop when the indicator on the knob’s outer ring points to the cycle and setting you want. See pages 6-7 for further cycle information. 2. Push the Start Button to start the dryer. To stop and restart the dryer l Open the door or turn the Cyde Control Knob to OFF to stop the dryer.
Operating instructions Continued The automatic cycles The automatic cycles allow you to select the degree of dryness you prefer for the dothes being dried. The automatic DRY-MISER@ control is a thermostat that senses the dryer air tempera- ture. The dryer automatically shuts off when the selected dryness is reached.
TIMED DRYING Use the TIMED DRYING cycle for any load you want to dry by time. This cycle is designed for small loads, large bulky items or items to be fluffed or dusted. Turn the Cycle Control Knob to the number of minutes you want from 10 to 70. The last 5 minutes of this cycle are without heat to help make the load easier to handle.
Additional Dryer Features Gentle Heat system For better fabric care, the Gentle Heat system helps prevent overdrying. Drying tempera- tures are automatically reduced to a lower heat setting during the last few minutes of drying. Gentle Heat is followed by a cool-down period in all cycles to make your clothes easier to handle.
Caring For Your Dryer Product and Fabric Damage Hazard Do not run the dryer with the lint screen loose, damaged, blocked or missing. Doing so can cause overheating and damage to both the dryer and fabrics. Cleaning the lint screen The lint screen is located under a lid on top of the dryer.
Caring For Your Dryer Continued Cleaning the dryer Electrical Shock and Personal injury Hazard l Tum off the electrical power before cleaning the interior. @Make sure the dryer is cool. Failure to do so could result in electrical shock or injury. Fire Hazard 4se non-flammable cleaner.
Lint removal Heat etemont temtlndr Eketttcdryuwtthbeckpmelremovad I Lint can gather inside the dryer and be a fuel for fire. It is recommended the lint be removed every 2 to 3 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.
Caring For Your Dryer Continued Remove screws before opanlng top Front pand Bdt a -Drum lfyourdryerisgasandhasafullfmntpanel, remove fmnt panei as follows: 1. Unplug the power supply cord or turn off the electrical power. 2. Open lint screen lid. Remove two screws in lint screen area.
Changing the drum light Electrical Shock and Fire Hazard l Before removlng light bulb, either un- plug the dryer or disconnect the dryer at the maln power supply. l The bulb cover must be in place during dryer operation to prevent overheating and possible damage to fabrics.
For Visually and Physically Impaired Continued For visually impaired consumers, audio cas- settes and braille Use and Care literature are also available. Order kit number(s) listed below: l Braille Use and Care llterature Kit No. 787481 l Audio cassette Use and Care literature Kit No.
If you prefer, write to: Mr. William Clark Consumer Assistance Representative Whirlpool Corporation 2000 M-63 Benton Harbor, MI 49022 Please include a daytime phone number in your correspondence. 3. If you need service*... 9 Whirlpool has a nationwide 1- network of authorized =n- WhirlpoolSM service companies.
WHIRLPOOL@’ Automatic Dryer Warranty DR006 LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRAm FSP@ replacement parts and repair labor to correct From Date of Purchase defects in materials or workmanship. Service must be provided by an authorized WhirlpoolSM service company.
An important point after buying a device Whirlpool LE6150XS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool LE6150XS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool LE6150XS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool LE6150XS you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool LE6150XS will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool LE6150XS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool LE6150XS.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool LE6150XS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool LE6150XS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
