Instruction/ maintenance manual of the product RX75 Beltronics
Go to page of 2
Please read both sides of these instructions before star ting your installation. For the easiest trouble-free installation, inst all the Interface first, and wire it to a 1 2 -volt switched circuit. Then before installing the other components, plug all of them into the Interface and power up the unit to confirm proper operation.
Note: 1. Connection between the radar receiver , and the receiver cable, must be located in a dry location under hood. 2. Only drill hole in firewall after thoroughly investigating location first, ensuring no other wires, hoses, etc. will be damaged. 3.
An important point after buying a device Beltronics RX75 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beltronics RX75 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beltronics RX75 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beltronics RX75 you will learn all the available features of the product, as well as information on its operation. The information that you get Beltronics RX75 will certainly help you make a decision on the purchase.
If you already are a holder of Beltronics RX75, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beltronics RX75.
However, one of the most important roles played by the user manual is to help in solving problems with Beltronics RX75. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beltronics RX75 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
