Instruction/ maintenance manual of the product DB4 90E Belling
Go to page of 36
Users Guide & Installation Handbook Be l ling Electric Range.
Our Warranty Should you need it . . . . Inside the paperwork which has come with this appliance, there is a leaflet and card explaining the terms of our extended warranty and guarantee. In order to apply for a one year guarantee, simply fill in the details on the card and post it off, this will register your appliance.
User’s Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using Your Cooker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . About Your Cooker.
Before Using Your Cooker Before using this appliance please make sure that you have removed all packaging and wrapping. Some of the furniture inside this appliance may have additional wrapping. It is also advised that you turn the ovens and/or grill on for a short while, this will burn off any residues left from manufacturing.
Hob & Cooker Safety Always ensure that pan bases are dry, and flat before using them on the hob. Always position pans over the centre of the element, and turn the handles to a safe position so they cannot be knocked or grabbed. Always use pans which are no smaller than 100mm (4”), or larger than 250mm (10”).
Chip Pan Fires What causes a chip pan fire? Chip pan fires start when oil of fat overheats and catches fire, or when oil or fat spills on to the cooker because the pan has been filled too high. They can also start when wet chips are put into hot oil, making it bubble up and overflow.
Through your programmer you will be able to set the time of day, set the minute minder, and use the semi and fully automatic cooking functions. The programmer is vital to the working of your appliance, and reading this section will make sure that you get the most out of your ovens.
Using The Programmer/Clock Setting an alarm tone (Push button timer) Press and hold the minus button. Once the minus button is released, the tone is selected. You can change tone by repeatedly pressing the minus button (3 tones) Setting the minute minder (push button timer) To set the Minute Minder, press the centre button once.
Use the Plus and Minus buttons to select the time the oven is required to turn off. Once this is done the oven will turn itself off at the pre- selected time. To turn off the alarm press any button. To cancel the Semi Automatic programme at any time, press the plus and minus buttons together.
Using The Programmer/Clock The programmer Icons (touch control timer) There are three icons on this type of timer. The table below shows you what the symbols look like, depending on the model type, and their functions.
Setting the Programmer Setting the minute minder (touch control timer) To set the Minute Minder, touch and hold the centre icon. The bell symbol will appear and start flashing. Important - The flashing will last for approx. 5 seconds so any setting must be set within this time frame.
Setting the Programmer Fully Automatic Cooking (Touch Control timer) This function allows the cooker to switch on and off automatically It requires both the duration and the end time to be entered. The timer will work out the start time and begin cooking.
Using Your Ceramic Hob About your hob Your hob may have halogen element (s) as well as the standard ceramic elements. In terms of care and use the procedure remains the same as with the other elements. The hot hob light The hot hob light will come on when one of the hotplates is switched on, or when it has begun to warm up.
Using Your Ceramic Hob Notes for Ceramic / Halogen hobs: Warning: Do not stare at the halogen hob element while it is in use - doing so may temporar ily impair your vision. Do not use the ceramic glass surface of the hob as a work surface or chopping board, this will cause damage to the glass.
Using Your Grill Before you start grilling. . . . Before you use the grill, make sure you have placed the grill shelf in the position you need as once the grill is on you may injure yourself if you try to move the shelf. Do not close the door while the grill is in use.
Using Your Main Oven The main oven may be controlled by the programmer (see The Programmer/Clock for details). The programmer, if fitted, must be set to manual before it can be used, or programmed. Switching on the fanned / conventional oven Use the main oven control to turn your oven on, and select your temperature.
Oven & Grill Functions Main Oven Function Recommended Uses Base Heat Only Used to finish off the bases of food following cooking using the conventional or fanned modes. The base heat can be used to provide additional browning for pizzas, pies and quiche.
Fanned Oven Guide Conventional temp (˚ C) ‘A’ E fficiency oven - Fanned (˚ C) Gas mark 100 110 130 140 150 160 180 - 190 200 220 230 250 100 110 120 130 140 150 160 170 180 190 200 1/4 1/4 1/2 1 2 3 4 - 5 6 7 8 9 Some adjustment will have to be made to conventional cooking temperatures.
Pre-heating To get the best results from your oven, we recommend pre-heating for around 5 to 15 minutes before placing your dishes in. This is especially important for items which are chilled, frozen, batter based, yeast based or whisked sponges. If you are using a fanned function, you should still pre- heat but for a shorter time.
Roasting Guide Roasting times depend on the weight, shape and texture of the meat and personal preference. In order to calculate the roasting time, weigh the meat or poultry, including the stuffing , and foll ow the times given below. Frozen meat must b e thoroug hly tha wed before cooking.
Roast turkey Roasting turkey perfectly involves cooking two different types of meat - the delicate light breast meat, which must not be allowed to dry out, and the darker leg meat, which takes longer to cook. The turkey must be roasted long enough for the legs to cook, so frequent basting is necessary.
General Baking Guide Trouble-shooting - Fruit Cakes Trouble-shooting - Sponge Cakes PROBLEM POSSIBLE CAUSE Fruit sinking to the bottom Low oven temperature which may cause the cake to take longer to set, allowing the fruit to sink. Or, too much liquid, or raising agent.
Cleaning Your Electric Hob Ceramic g lass hobs (if fitted) The ceramic hotplates, and hob top can be cleaned using a clean, damp cloth or kitchen paper.
Cleaning your Cavities Cleaning the oven cavities Some foods can cause fat to spit, especially if you have open roasted, this leaves the inside of the cavity greasy. It is important to clean the oven cavity as a build up of fat can damage the appliance and may invalidate your guarantee.
Baby oil can be used to restore stainless steel finishes - but only use a few drops. Don’t use cooking oils as they can contain salts which will damage the metal. Take extra care when cleaning over symbols on fascia panels, excessive cleaning can lead to the symbols fading.
Cook Shop Product description Product code Quantity Where used Rectangular carbon filters 082612620 2 Hoods Round carbon filters 082611571 1 Hoods Ceramic hob scraper kit 082606781 1 All ceramic glass hobs including induction.
Before you call. . Problem? Advice There’s condensation on the doors. Condensation is caused by hot, moist air meeting a cooler surface (i.e. the oven door).
No. of lamps Bulb Location Oven type Instruction for changing the bulb 2 (@25W) side All Wait until the oven is cool, th en r em o ve t he o ve n shelves. Grasp the lens cover on the light fitting and pull it away from the side of the oven. Unscrew the bulb.
Installing Your Cooker Always make sure that your appliance is fitted correctly, by a competent electrician. This is a type X appliance regarding installation requirements, and must be earthed.
Installing Your Cooker Clearances This cooker may be fitted flush to the base units of your kitchen. No shelf, overhang, cupboard, or cooker hood should be less than 650mm above the hob top, but please check this with the hood manufacturers instructions.
Installing Your Cooker Fitting the plinth (if applicable) If your appliance has a storage drawer at the bottom, you access the required holes through the base of the drawer after lifting the mat. Open the appliance doors, and loosen screw A located on bracket (2).
Installing Your Cooker Connecting the electricity supply - Terminal Block type A Warning: This appliance must be earthed! Access to the mains terminal is gained by opening the terminal block cover at the rear of the appliance - use a flat bladed screw driver for this.
Installing Your Cooker Connecting the electricity supply - Terminal Block type B This appliance must be fitted using a double pole unit of 45 ampere minimum capacity with 3mm minimum contact at all poles. Access to the mains terminal is gained by removing the terminal block cover at the rear of the appliance.
Technical Data - Notes Fuel Type C onventional oven Fanned oven Dual Variable grill (90 / 100 size) Dual Variable grill (110 size) Electric @ 2 4 0V 2. 1 kW 2. 0 kW 1.7 - 2.5kW 1.8 - 2.7kW 1.7 - 2.6kW 1.8 - 2.8kW Oven lamps Single Variable grill (90 size) 25W each 1.
Service Record Date of purchase Installer stamp / Printed name Date of installation Place of purchase: Date Part(s) replaced Engineers Stamp/ Printed Name Model Number Serial Number Please record your model number and serial number in the space below.
08 2 7 4990 1 © 1 1 .2 0 10 Electric Range Model Names: C ountry classic 100E, Classic 90E, 100E, 110E, DB4 90E . Contact Us Should you need to get in touch with us (UK and Northern Ireland only), pl.
An important point after buying a device Belling DB4 90E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belling DB4 90E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belling DB4 90E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belling DB4 90E you will learn all the available features of the product, as well as information on its operation. The information that you get Belling DB4 90E will certainly help you make a decision on the purchase.
If you already are a holder of Belling DB4 90E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belling DB4 90E.
However, one of the most important roles played by the user manual is to help in solving problems with Belling DB4 90E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belling DB4 90E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
