Instruction/ maintenance manual of the product FGS395V Whirlpool
Go to page of 16
Ui6R%d Care Guide ROPER Appliances FGS385V FGS395V Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quality- built Roper range. Keep this Use and Care Guide in a safe place for future reference.
Important Safety Instructions Gas ranges have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are specific installation and safety precautions which must be followed to ensure safe and satisfactory operation.
15. Grease is flammable and should 20. Always position oven racks in 28. Be sure all range parts are cool be handled carefully. Let fat cool desired location while oven is before cleaning. before attempting to handle it. DO cool. 29. DO NOT clean door seal.
Using Your Range Models FGS385V & FGS395V (shown) Surface burner marker Right rear Right front control knob. control knob I Left front Left rear control knob control knob ~~ I Oven light switch Using the surface burners In case of a prolonged power Push in failure --I- and turn Surface burners can be manually lighted.
Time/Temp Set Knob Once you’ve pushed a command button to tell the oven what you want it to do, you’ll use the Time/Temp Set Knob to set a temperature or time. Turning the Time/Temp Set Knob clockwise increases the number on the display. Turning the Time/Temp Set Knob counterclockwise decreases the number on the display.
Broiling Broiling tips 1 The effective useful cooking area of the broiler is reduced when you use the higher rack positions. In the second from the top rack position, the infra-red rays cover only about 85% of the broiler grid area. . To sear meat, place broiler pan at one of the higher rack positions so that meat is very near the flame.
Using the electronic oven control The electronic oven control will turn the oven on and off at times you set...even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles. Do not use the automatic cycle for cakes, cookies, etc.
Hot air and moisture escape from the oven through a vent located under the backguard. The vent is needed for air circulation. Do not block the vent. Poor baking will result. The storage drawer Replacing the storage drawer: The storage drawer is for storing pots and pans.
Caring For Your Range Burn, Electrical Shock, Fire And Explosion Hazard . Make sure all controls are OFF and the range is cool before cleaning. 1 Do not use oven cleaners, bleach or rust removers. 1 Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance.
Using the Self-Cleaning cycle The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before you start I Hand clean frame I Hand clean door around edge I Do not hand clean seal 1.
Setting the controls 1. Make sure the Clock is set to the right time of day. (See “Setting the clock” on page 5.) 2. Move the Lock Lever all the way to the right - the Clean position. Push the Clean button. A 3-hour Self-Cleaning cycle will be set automatically.
Cleaning chart Burn And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in bums or electrical shock.
The oven light The oven light will come on when you push the Oven Light Switch on the control panel. Push the switch again to turn off the light. Electrical Shock And Personal Injury Hazard m Make sure oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. Oven will not operate. Burner fails to light. Burner flames are uneven.
OPERATING PROBLEM Control knob(s) will not turn. If the Self-Cleaning cycle will not operate. CHECK IF . You pushed in knob(s) before trying to turn. . The clock shows the right time of day. . The Lock Lever is all the way to the right. . You have set a delay start time.
LIMITED WARRANTY ROPER Appliances LENGTH OF WARRANTY (From date of purchase) FULL ONE YEAR WARRANTY PRODUCTS COVERED WHAT WE WILL PAY FOR All Roper Appliances Replacement parts and repair labor to correct defects m materials or workmanship.
An important point after buying a device Whirlpool FGS395V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool FGS395V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool FGS395V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool FGS395V you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool FGS395V will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool FGS395V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool FGS395V.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool FGS395V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool FGS395V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
