Instruction/ maintenance manual of the product FEP350V Whirlpool
Go to page of 16
Electric Range Useand CareGuide ROPER Appliances FEPZlOV FEP335V FEP310V FEP340V FEP320V FEP350V FEP330V FEC350V Thank you for choosing a Roper appliance. This Use and Care Guide wiIl help you operate and maintain your new, quality- built Roper range.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: 1. Read all instructions before using the range. 2. Install or locate the range only in accordance with the provided Installation Instructions.
28. DO NOT soak removable heating elements in water. The elements wilI be damaged and shock or fire could result. 29. DO NOT clean door heat seal. It is essential for a good seal. Care should be taken not to rub, damage, or move the seal. Clean only parts recommended in this Use and Care Guide.
Parts & Features Models FEC350V, FEP350V. FEP340V (shown), FEP335V (with solid elements), FEP330V & FEP320V Electronic clock/ timer (not inc on Model FEP Plua-in surface unit Model FEPZlOV (no.
Using the surface units Using Your Range Models FEC350V, FEP350V & FEP340V Left rear control knob Left front control knob Time bake switch (Models ;xtn;;mp FEC350V & Right front Right rear FEP.
Solid elements hold heat longer than conventional surface units. For best cooking results, use a high setting for only a short period of time. Then use a lower setting to complete the cooking. You may want to turn the solid element surface unit OFF a few minutes before you finish cooking.
Using the oven controls Baking 1, Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out. The rack(s) should be placed so the top of the food will be centered in the oven.
The oven vent Hot air and moisture escape from the oven through a vent under the right rear surface unit (or under the backguard on Model FEP335V with solid elements). You can cook on the unit, or keep food warm on it while the oven is on. The vent is needed for air circulation.
Caring For Your Range Bum And Electrical Shock Hazard Make sure all controls are OFF and 1 or electrical shock. 1 the range is cool before cleaning . Failure to do so can result in bums The control knobs 1. Turn control knobs to the OFF position. 2. Pull control knobs straight off.
The lift-up cooktop (all models except FEP335V) 1. Lift front of cooktop at corners. 2 Swing up the support rod (if included on your model). 3. Carefully lower the cooktop onto the support rod. NOTE: Models FEP310V and FEP2lOV do not include support rods.
The standard-cleaning oven Using foil The standard oven has to be hand cleaned. Use warm soapy water, soapy steel wool pads or a commercial oven cleaner. See “Cleaning chart”on page 12 for further instructions. Using foil on the continuous-cleaning oven bottom is recommended to catch sugar and starchy spills from pies and casseroles.
Cleaning chart Bum And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in bums or electrical shock. PART Exterior surfaces Coil surface units Chrome reflector bowls WHAT TO USE Warm soapy water and a soft cloth.
PART Standard oven WHAT TO USE HOW TO CLEAN Warm, soapy water or soapy steel . Make sure oven is cool. wool pads. m Remove door for easier access. OR . Clean heavily-soiled areas or stains. Rinse well with water. Commercial oven cleaners. n Remove door for easier access.
The oven light (Models FEC350V, FEP350V & FEP340V) To turn the oven light on, push the Oven Light Switch on the control panel. Push the switch again to turn off the light. To replace: Electrical Shock And Personal Injury Hazard n Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM CHECK IF WHAT TO DO Nothing operates. n Range is properly connected to a live n Reconnect range to electrical supply.
LIMITED WARRANTY Appliances LENGTH OF WARRANTY (From date of purchase) PRODUCTS COVERED WHAT WE WILL PAY FOR FULL ONE YEAR WARRANTY All Roper Appliances Replacement parts and repair labor to correct defects in materials or workmanship.
An important point after buying a device Whirlpool FEP350V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool FEP350V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool FEP350V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool FEP350V you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool FEP350V will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool FEP350V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool FEP350V.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool FEP350V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool FEP350V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
