Instruction/ maintenance manual of the product EV150 Whirlpool
Go to page of 2
THIS SERVICE POINTER APPLIES TO THE FOLLOWING BRANDS: Whirlpool R efrigeration Defrost Drain Icing Up No Frost Models EV200 & EV150 CA USE: COMPLAINT : W ater running onto freezer floor and then freezing. Not enough heat radiating into defrost drain area to k eep ice from building up during defrost.
The kit contains the follo wing: 4 each Nylon Ties 1 each Heat Shield 3 each Aluminum P op-Rivets 1 each Instruction Sheet The instructions listed below are more detailed than those included in the Heat Shield Kit: NO TE: T o replace the heat shield, the e vapor ator mount- ing plate must be remov ed.
An important point after buying a device Whirlpool EV150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool EV150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool EV150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool EV150 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool EV150 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool EV150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool EV150.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool EV150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool EV150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
