Instruction/ maintenance manual of the product PR-25 Bell'O
Go to page of 16
PR-25 Real W ood Audio V ideo Cabinet ASSEMBL Y INSTRUCTIONS Patent Pending The real hardwoods used in Bell'O furniture are naturally beautiful. Some differences in wood grain are desirable and expected. Please use only high quality wood furniture polish to care for your cabinet.
P ARTS LIST P ART DESCRIPTION QUANTITY A. CABINET TOP 1 PC B. LEFT SIDE SUPPOR T P ANEL 1 PC C. RIGHT SIDE SUPPOR T P ANEL 1 PC D. UPPER INTERIOR SHELF 1 PC E. MIDDLE INTERIOR SHELF 1 PC F . BOTTOM SHELF 1 PC G. T OP DOOR P ANEL 1 PC H. LOWER SHELF DIVIDER 2 PCS I.
P ARTS LIST (Continued) P ART DESCRIPTION QUANTITY K1. UPPER BACK P ANEL 1 PC K2. LOWER BACK P ANEL 1 PC L. LOWER CABINET DOORS 2 PCS 1. CAM LOCK PIN 18 PCS 2. CAM LOCK 18 PCS 3. 30MM DOWEL 32 PCS 4. 03X12MM SCREW 33 PCS 5. 50MM DOWEL 4 PCS 6. LEFT DRA WER HINGE 1 PC 7.
FOR YOUR SAFETY , PLEASE FOLLOW THESE PRECAUTIONS: ! AL W A YS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED UNIT .
ASSEMBL Y INSTRUCTIONS NOTE: 2 PEOPLE ARE RECOMMENDED T O ASSEMBLE THIS FURNITURE. THIS T ABLE IS CONSTRUCTED WITH REAL WOOD VENEER. T O A VOID DAMAGE DURING ASSEMBL Y , IT S HOULD BE ASSEMBLED ON A SOFT SURF ACE. 5 Fig. 1 1. PLACE the bottom shelf (F) on edge.
Fig. 2 6 E F H 5 2. PLACE four larger dowels (5) half way through the lower middle shelf (E), and PLACE the ends of the dowels into the exposed edge of the divider (H) as shown in Fig.
7 Fig. 3 3. PLACE the second divider (H) over the exposed ends of the dowels (5) on the opposite side of the lower middle shelf (E) with the FRONT arrow facing the front of the shelf (the edge without the cut out slots) as shown in Fig.
Fig. 4 8 4. Place four smaller dowels (3) into the holes on the exposed edge of the divider (H). Place the upper interior shelf (D) onto the dowels as shown.
9 H B 14 3 2 1 10 Fig. 5 5. PLACE the left cabinet side (B) on a soft surface with the levelling foot facing the rear as shown. A. SCREW two cam lock pins (1) into the upper and center cross frame, and three cam lock pins (1) into the bottom cross frame.
10 Fig. 6 6. Placement of the right cabinet side (C): A. SCREW two cam lock pins (1) into the upper and center cross frame, and three cam lock pins (1) into the bottom cross frame.
Fig. 7 11 I 3 7 7 8 G 8 D 4 6 9 4 7. CAREFULL Y TURN the partially assembled cabinet upright. A. SCREW the LEFT drop down door hinge (6) and RIGHT door hinge (9) into the interior sides of the cabinet using the small Philips head screws (4). NOTE: THE DOOR TENSION ON THE HINGES CAN BE ADJUSTED BY TURNING THE KNOB LOCA TED ON THE HINGE.
12 Fig. 8 8. SCREW two cam lock pins (1) into the tops of the cabinet sides (B) and (C). A. PLACE two smaller dowels (3) into the tops of the cabinet sides, and the tops of the dividers (I). B. PLACE two cam locks (2) into the interior of each cabinet side.
13 Fig. 9 9. Working from the rear of the cabinet, SCREW two rear panels (K1) and (K2) to the cabinet using screws (4). NOTE: THE REAR P ANELS ARE MADE T O BE SNUG.
14 10. SCREW the lower door hinges (12) to the interior of the cabinet using screws (1 1). A. A TT ACH the cabinet doors (L) to the hinges (12) using screws (1 1). B. A TT ACH the lower cabinet knobs (13) to the doors using screws (8). Fig. 10 8 13 13 8 11 11 L L 12 11 12 Ensure table is level by adjusting rear legs (J).
15 Fig. 1 1: Aligning the Doors 1 1. ALIGN the doors by adjusting the screws on the insides of each hinge (1 1) using the supplied screwdriver tool as shown.
Warranty One (1) Y ear Limited Warranty All Bell’O International products are warranted, with the exception of glass, to the original purchaser at the time of purchase and for a period of one (1) year thereafter . Glass is warranted to the original purchaser at the time of purchase and for a period of thirty (30) days thereafter .
An important point after buying a device Bell'O PR-25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bell'O PR-25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bell'O PR-25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bell'O PR-25 you will learn all the available features of the product, as well as information on its operation. The information that you get Bell'O PR-25 will certainly help you make a decision on the purchase.
If you already are a holder of Bell'O PR-25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bell'O PR-25.
However, one of the most important roles played by the user manual is to help in solving problems with Bell'O PR-25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bell'O PR-25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
