Instruction/ maintenance manual of the product VoIP Belkin
Go to page of 13
INTRODUCTION Enable wireless and wireless security on your Belki n VoIP modem/router. APPLIES TO: • F1PI241EGau.
TABLE OF CONTENTS:- Enable Wireless on your Modem/Router 1 Setup Wireless Encryption 3 Wireless Security Information 3 64 Bit WEP 4 128 Bit WEP 6 WPA 8 Connecting to the Wireless Network 9.
Before you begin: You will need: • Belkin Wireless / VoIP unit • Power cable • Network cable Hardware check: • Your computer is switched on • The Wireless / VoIP unit is switched on (power s.
5) You will now be presented with more options in the menu on the left. Cli ck Wireless then click Enable Wireless Func tion and click Save Settings Wireless is now enabled. We strongly recommend that you setup Wire less Security to help protect your wireless network against unauthorised use.
WIRELESS SECURITY INFORMATION Click the type of security you wish to setup:- 1) 64 Bit WEP 2) 128 Bit WEP 3) WPA 3 Encryption Type Pros Cons Recommended usage 64 Bit WEP Most compatible form of encryption Least secure Older computers and wireless adapters Easy to setup and manage (Windows 98/ME/2000 &/or 802.
64 Bit WEP:- 1) Under Wireless click WEP 2) Click Enable for WEP Function 3) Click 64 Bit for WEP Mode leave all other settings as defaul t 4) Under Key 4 field, click the Clear button 5) Place a tick.
8) Now click WEP again 9) Write down the characters in Key 1 – this i s now your ‘Network Key’ or ‘Encryption Key’ NB. There are ten (10) characters in total.
128 Bit WEP:- 1) Under Wireless click WEP 2) Click Enable for WEP Function 3) Click 128 Bit for WEP Mode leave all other settings as defaul t 4) Under Key 4 field, click the Clear button 5) Place a ti.
8) Now click WEP again 9) Write down the characters in Key 1 – this i s now your ‘Network Key’ or ‘Encryption Key’ NB. There are twenty six (26) characters in total. This is the ‘key’ that will be required to be entered on your wi reless PC.
WPA:- 1) Under Wireless click WPA 2) Click Enable for WPA Function 3) Authentication is Pre-Shared Key – leave all other set tings as default 4) In the space provided in Pre-shared Key, create a pas.
Connecting to the Wireless Network using Wireless Zero Configurati on 1) If you are using a laptop or notebook with a built in wireless connecti on, make sure the Wireless Switch and/or Wireless Button on your compute r is turned on.
6) Select your network from the list and click Connect 7) If you have encryption enabled – it will prompt you to enter your N etwork Key. In the Network Key field type in the network key you wrote down when setting up encryption in the router. 8) Re-enter the key next to Confirm Network Key a nd click Connect .
For further assistance setting up non-Belkin wirel ess cards (including laptops with built-in wireless) you will need to contact the appr opriate manufacturer. If you required further assistance with a Belkin Wirele ss Card, please contact Belkin Technical Support on 1800 BELKIN.
An important point after buying a device Belkin VoIP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin VoIP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin VoIP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin VoIP you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin VoIP will certainly help you make a decision on the purchase.
If you already are a holder of Belkin VoIP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin VoIP.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin VoIP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin VoIP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
