Instruction/ maintenance manual of the product EB21DKXDB01 Whirlpool
Go to page of 22
TLidl 01 2 Home Appliances UseAndCare 21’ NO-FROST DESIGNERSTYLEm BOTTOM FREEZER REFRIGERATOR PART NO. 2173957 Table of Contents (complete) . . . . . . . . . . . . . . . . . . 2 A Note to You . . . . . . . . . . . . . . . . 2 Refrigerator Safety . .
Table of Contents Page A Note to You.. .......................................................... 2 Refrigerator Safety ................................................... 3 Parts and Features ................................................... 4 Before Using Your Refrigerator .
Refrigerator Safety Your safety is important to us. This guide contains statements under warning sym- bols. Please pay special attention to these symbols and follow any instructions given. Here is a brief explanation of the use of the warning symbol. This symbol alerts you to dangers such as fire, electrical shock, burns, and personal injury.
Parts and Features This section contains captioned illustrations of your appliance. Use them to become familiar with where all parts and features are located and what they look like.
Before Using Your Refrigerator It is important to prepare your refrigerator for use. This section tells you how to clean it, connect it to a power source, install it, and level it. Cleaning your refrigerator Removing packaging materials Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.
Using Your Refrigerator To obtain the best possible results from your refrigerator, it is important that you operate it properly. This section tells you how to set the controls, remove and adjust the features in your refrigerator, and how to save energy.
Changing the control settings If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have any questions, call our Consumer Assistance Center number, l-800-253-1301, from anywhere in the U.
Adjusting the EZ-TRACKTM refrigerator shelf The EZ-TRACK shelf slides from side to side for more flexible storage in your refrigerator. To slide shelf side to side: 1. Lift slightly on shelf front. 2. Slide to desired location. 3. Lower shelf front to level position.
To reinstall shelf: 1. Hold shelf at front and back. Upper channel 2. Tilt front of shelf up to a 45” angle to track. 3. Insert both rear shelf slides into upper channel of track. 4. Lower front of shelf to a level position. NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.
Removing the crispers and crisper cover To remove the crispers: 1. Slide crisper straight out to the stop. 2. Lift the front and slide out the rest of the way. 3. Replace in reverse order. To remove the cover: 1. Push up the glass insert from the bottom, then slide out with both hands.
Using the optional automatic ice maker If your refrigerator has an automatic ice maker, or if you plan to add one later (contact the dealer for ice maker kit number), here are a few things you should know: l The ON/OFF lever is a wire signal arm.
Attaching the ice maker to a water supply Read all directions carefully before you begin. Electrical Shock Hazard Unplug the refrigerator before installing icemaker. Failure to do so can result in death or electrical shock. IMPORTANT: l Use copper tubing only and check for leaks.
5. Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the G-inch drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal.
Removing the base grille To remove the grille: 1. Open refrigerator door. 2. Pull base grille forward to release the support tabs from the metal clips. 3. Do not remove Tech Sheet fastened behind the grille. To replace the grille: 1. Line up grille support tabs with metal clips.
Understanding thre sounds you may hear Your new refrigerator may make sounds that your old Water sounds one didn’t. Because the sounds are new to you, you When the refrigerator stops running, you may hear might be concerned about them. Don’t be. Most of the new sounds are normal.
Your refrigerator is built to give you many years of dependable service. However, there are a few things you can do to help extend its product life. This section tells you how to clean your refrigerator and what to do when going on vacation, moving, or during a power outage.
PART WHAT TO USE HOW TO CLEAN Defrost pan Sponge or cloth with mild detergent and warm water l Remove base grille. (See page 14.) l Reach into small opening at right edge and remove the defrost pan. . Wash, rinse, and dry thoroughly. l Replace defrost pan.
Power interruptions If electricity goes off, call the power company. Ask how long power will be off. 1. If service will be interrupted 24 hours or less, keep both doors closed. This helps foods stay frozen. 2. If service will be interrupted longer than 24 hours: (a) Remove all frozen food and store in a frozen food locker.
Food Storage Guide There is a correct way to package and store refrigerated or frozen food. To keep food fresher, longer, take the time to study these recommended steps. Storing fresh food Wrap or store food in the refrigerator in airtight and moisture-proof material.
Troubleshooting Performance problems often result from little things you can fix without tools. Please read through “Before calling for assistance . . .I’ below before calling for service on your appliance. Before calling for assistance . . . Listed in this chart are the most common problems consumers run into with their appliances.
Reauestina Assistance or Service ~ I- w Before calling for assistance or service, please check “Troubleshooting” on page 20. It may save you the cost of a service call. If you still need help, follow the instructions below. For assistance or service: 1.
Warranty WHIRLPOOL@ Refrigerator Warranty - LENGTH OF WARRANTY FULL ONE-YEAR WARRANTY From Date of Purchase FULL FIVE-YEAR WARRANTY From Date of Purchase WHIRLPOOL WILL PAY FOR FSP@ replacement parts and repair labor to correct defects in materials or workmanship.
An important point after buying a device Whirlpool EB21DKXDB01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool EB21DKXDB01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool EB21DKXDB01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool EB21DKXDB01 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool EB21DKXDB01 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool EB21DKXDB01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool EB21DKXDB01.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool EB21DKXDB01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool EB21DKXDB01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
