Instruction/ maintenance manual of the product CHE-12RS Whirlpool
Go to page of 6
3Lirlpool AUTOMATIC ICE CUBE MAKER User’s Instructions & Care and Cleaning Guide MODEL - CHS12RC CHSl2RS CHE-12RC CHE-12RS.
General Information The machine produces clear hard ice by circulating water over a freezing plate. As the water freezes into ice, minerals in the water are constantly being rejected and a clear sheet of ice is formed.
I 4. Unlatch the two snap catches and swing the front panel open on its hinges. If there is inadequate clearance to swing the panel open, the front panel can also be lifted off the hinges. The control panel cover may have to be removed to lift the front panel off its hinges.
14. Remove the ice cube deflectors between each cutter grid. The lower left edge has a locking tab which must clear the grid frame. Push left and up on the lower edge of the deflector. The right edge then readily comes off the lower flange of the cutter grid above.
Turn Clockwise To Increase Thickness IN. THICKNESS 3/8” MAX. THICKNESS 1” Thickness of the Ice can be varied by rotation of the inverted “L” shaped adjusting screw which IS located on the thickness control. The thickness control IS mounted on the lower freezing plate.
Check the following before calling a service man: A. Unit does not run: 1. Make sure service switch is posltioned to “normal on” or “timed on”. 2. If service switch is in “timed on” position then control timer must be in the timed setting which allows the machine to operate.
An important point after buying a device Whirlpool CHE-12RS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool CHE-12RS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool CHE-12RS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool CHE-12RS you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool CHE-12RS will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool CHE-12RS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool CHE-12RS.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool CHE-12RS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool CHE-12RS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
