Instruction/ maintenance manual of the product AWM 1007 Whirlpool
Go to page of 15
DEFINITION OF USE This appliance is exclusivel y destined to wash and spin machine washable laundry in quantities which are usual for private households. • Observe the instructions given in these Instructions for Use and in the separa te Programme Chart when using the washing machine.
FIRST WASH CYCLE PRECAUTIONS AND GENERAL RECOMMENDATIONS 1.Safety Instructions • This washing machine is not intended for use by persons (including children ) with reduced physical, sensory or menta.
DESCRIPTION OF THE WASHING MACHINE CHILD SAFETY 1. Worktop 2. Control panel 3. Detergent dispenser 4. After-Sales Service sticker (on the front panel behind the door frame) 5. Door 6. Door handle • To open the door pull the handle • Close the door by pushing it firmly (the lock will click into place) 7.
DETERGENTS AND ADDITIVES P ouring in deter gents and additives Pull out the d eter gen t disp enser to its full e xten t. P our in deter g ent: Chamber • Detergent for the pre-wash Chamber • Deter.
Notes: • Keep detergents and additives in a dr y place and out of reach of children. • If you use descaling agents , dyes or bleaches, make sure they are suitable for washing ma chine use. Descaler could contain com ponents that can damage pa rts of your washing machine.
DRAINING RESIDUAL WATER Residual water should be removed: • before moving a washing machine (relocation), • when installing in areas prone to frost and • before removing the filter. 1. Before emptying the residua l water, switch the appliance off and un plug it from the mains socket.
CLEANING THE FILTER The filter must be taken out if: • the washing machine does not drain properly, • small items, e. g. buttons and coins rattle in the pump and • 2 to 3 times a year for inspection. You must remove the residual water before t aking out the filter.
CARE AND MAINTENANCE Appliance exterior and control panel • Clean using a neutral hou sehold detergent and a damp cloth (do not use abrasive products or solvents).
TROUBLESHOOTING GUIDE This washing machine is equipped with automatic safety functions which de tect and diagnose faults at an early stage and react appropriately. Often, however, the faul ts detected are small enough to be solved in a matter of minutes.
What should I do when the automatic safety system detects a malfunction? The programme is interrupted and various indicators (if available) poi nt to the source of the fault. Fault description table a. No or not enough water inlet • Open the water tap and check wether the water supply pressure is sufficient.
AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has so lved itself. 3. If the machine continues to function incorrectly, call After-Sales Service.
INSTALLATION Remove the transit bolts 1. Slacken the four bolts with the spanner supplied. 2. Unscrew the bolt by hand. 3. Grip the bolt and remove it through the la rge aperture.
Adjust the feet Small unevennesses in the floor can be compensated for by screwing the four appliance feet up or down (never use pieces of wood, cardboa rd or similar material): 1. The washing machine must be installed horizontally in width and depth.
Connect the water supply hose(s) (A or B, depending on the model) • If your washing machine has one inlet hose and one inlet valve on the back: connect to cold water supply only.
5019 301 15247 GB Printed in Germany Ecological P aper 1/0410 ELECTRICAL CONNECTION For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this a ppliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.
An important point after buying a device Whirlpool AWM 1007 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool AWM 1007 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool AWM 1007 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool AWM 1007 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool AWM 1007 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool AWM 1007, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool AWM 1007.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool AWM 1007. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool AWM 1007 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
