Instruction/ maintenance manual of the product AWG 294 Whirlpool
Go to page of 27
193 INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE ....................... ........... PAGE 194 SAFEGUARDING THE ENVIRONMENT ....................... PAGE 194 PRECAUTIONS AND GENERAL RECOMMENDATIONS ............................................... ....
194 BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT • Your new appliance is de signed exclusively for domestic use To get the most out of your new appliance, read the user handb ook thoroughly. The handbook contains a description of the appliance and useful tips for storing food.
195 PRECAUTIONS AND GENERAL RECOMMENDATIONS • Use the refrigerator compartment only for storing fresh food and beverages and use the freezer compartment only for storing frozen food, freezing fresh food and making ice cubes. • After installation, make sure that the appliance is not standing on the power supply cable.
196 CONTROL PANEL DESCRIPTION The control Panel is located at the top front of the refrigerator compartment. T emperature Controls For your convenience, your temperature controls are preset at the factory. Wh en you first install your refrigerator, make sure the controls are stil l set to the recommended set points as shown.
197 Fast Cooling & Fast Freezing The Fast Cooling & Fast Freezing feature as sists with periods of high refrigerator use, full grocery loads, or tem porarily warm room temperatures. • Press the Fast Cooling & Fast Freezin g touch pad to set the freezer and refrigerator to the lowest temperature settings.
198 Wa t e r D i s p e n s e r (select models) If you did not flush the water system when the refrigerator was first installed, dispense water into a co ntainer until you draw and discard 2 to 3 L (8 to 12 gal.) or for approx imately 6 to 7 minutes after the water begins dispensing.
199 USE OF ICE MAKER AND WATER DISPENSER Automatic Ice Maker Connect the ice maker to the water supply as instructed. Proper water flow and a level refrigerat or are essential for optimal ice maker performance. Ice Maker Operation • To turn ice maker On push ar m down from locked position.
200 WATER FILTER (SELECT MODELS) W ater Filter Removal and Installation If your appliance must be connec ted to the mains water supply to operate the water dispenser and/or ice maker, it must be a water supply which delivers potable water only. Ice makers not connected to a mains water supply must be filled with potable water only.
201 GUIDE TO INTERNAL COMPONENTS Shelves • Never attempt to adjust a shel f that is loaded with food (except in the case of the lift shelf). • Confirm shelf is secure befo re placing items on shelf. Your refrigerator has either spill guard glass shelf or non- sealed Shelves .
202 To Install: • Reverse the removal p rocedure. Be sure the shelf is in a level position. • When the sliding shelf is pushed to the rear , it will reposition the rear latches to their correct operating position. The Crisper Top serves as the lowe r fresh food shelf.
203 P arty chiller (select models) The party chiller keeps beverages and other items cooler than the rest of the fr esh food section. A cold air inlet allows air from the freezer section to pass into the beverage chiller. The party chiller control is located on the left wall of the fresh food compartment.
204 Notes • Cold air directed to the draw er can decrease refrigerator temperature. Refrigerator contro l may need to be adjusted. • Do not place leafy veg etables in the drawer. Colder temperatures could damage leafy produce. To Remove Drawer: • Lift lid.
205 Wire Basket (select models) To Remove: • Pull basket out to full extension. Tilt up front of basket and pull straight out. To Install: • Insert basket into freezer liner rails and push back into place. Freezer Door Shelf (select models) The Freezer Door Shelf provides convenient storage for frozen food items in freezer door.
206 GUIDE TO STORAGE AND THAWING OF FOOD The freezer compartment, marked with the symbol , is used for storing fr ozen food and freezing fresh or cooked food. The maximum quantity of food which can be frozen in a 24 hour period, at an ambient temperature of 25°C, is stated on the ra ting plate, inside the refrigerator compartment.
207 FOOD STORAGE CHART Storage time will vary according to the quality of the food, th e type of packaging or wrap used (moisture and vapour proof), and the storage tempe rature (which should be -18°C).
208 MAINTENANCE AND CLEANING Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply. Periodically clean the refrigerator and freezer compartmen ts with a cloth and a solution of lukewarm water and neutral detergent specific ally for refrigerator interiors.
209 TROUBLESHOOTING GUIDE/AFTER-SALES SERVICE When you hear these noises Before contacting After-sales Service.... Performance problems often result fr om simple things you can find a n d solve yourself without tools of any kind.
210 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. See if you can solve the problem yourself with the help of the “TROUBLESHOOTING GUIDE/ AFTER-SALES SERVICE”). 2. Switch the appliance on again to see if the problem has been solved.
211 INSTALLATION Your new appliance is a FULL NO FROST model exclusively for domestic use, i.e. both refrigerator and freezer compartments are provided with an auto matic defrosting function.
212 DOOR AND DRAWER REMOVAL Some installations require door/d rawer removal to transport the refrigerator to its final location. Disconnect power to refrigerat or before removing doors or drawer. Connect power only after replacing doors or drawer. Door remov al To Remove: 1.
213 Drawer Removal To avoid possible injury, product, or property damage, you will need two people to perform the following instructions. To Remove: 1. Pull drawer open to full extension. 2. Pull upper basket ou t to full ex tension and lift out to remove.
214 Leveling • Do not use power tools when pe rforming leveling procedure. • To enhance the appearance an d maintain performance, the refrigerator should be level. (side to side) Note Complete any required door revers al, panel installation and/or a water supply connection, before leveling.
215 Handles If not installed, the handle is lo cated in the interior of the fresh food section or attached to th e back of your refrigerator. Remove and discard handle packagin g and tape. Handle design varies from re frigerator to refrigerator. Please reference the appropria te instructions for your model below.
216 Freezer Handles Partial-Width Handle Materials Needed • Phillips screwdriver To Install: 1. Install handle by fasten ing with screws removed from edge of door. • If reversing freezer door, remove door plugs from top edge of door and insert in to screw holes.
217 Front Mount F reezer Handle Materials Needed • Gloves to protect hands. • Phillips screwdriver. • Plastic handle removal card (o r 0.1 cm thick plastic card). Retain the card. Notes • There is a slight curve to th is style of freezer handle.
218 WATER CONNECTION Opening and Closing Y o ur Fresh Food Doors (select models) Your new refrigerator is uniquely designed with two fresh food doors. Either door can be open ed or closed independently of one another. There is a vertically-hinged section on the left fresh food door.
219 ELECTRICAL CONNECTION Regulations requir e that the appliance is earthed. The manufacturer declines all liability for injury to persons or animals and for damage to property result ing from failure to observe the prescriptions.
An important point after buying a device Whirlpool AWG 294 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool AWG 294 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool AWG 294 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool AWG 294 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool AWG 294 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool AWG 294, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool AWG 294.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool AWG 294. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool AWG 294 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
