Instruction/ maintenance manual of the product Pre-N Belkin
Go to page of 92
F5 D8 63 0- 4A User Manual Network y our c omputers and shar e your ADSL Internet ac ces s ADSL Modem with wir el ess Pr e-N Router .
1 T abl e of Contents 1 1 Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits of a Home Network . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Advantages of a Belkin Wireless Network . . . . .
1 Intr oduction 1 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 section Thank you for purchasing the Belkin ADSL Modem with High-Speed Mode Wireless G Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router .
3 2 3 2 Package Contents • MIMO ADSL Modem Router • RJ11 T elephone Cord - Gray • RJ45 Ether net Networking Cable - Y ellow • ADSL Microfilter* • Power Adapter • User Manual CD *ADSL microfilter varies by country . If it’ s not included, you will need to purchase one.
3 Knowing your Router 3 The Router is designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility . The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status.
5 4 Knowing your Router 5 4 Knowing your Router 3. WLA N Status LE D The WLAN Status LED is solid GREEN when you enable the wireless LAN function. It flashes when the Router is transmitting or receiving data wirelessly . OFF WLAN is off Green WLAN is up and connected Green - blinking When transmitted or r eceiving data 4.
5 Knowing your Router 5 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Back Panel 6. DSL Li ne This port is for connection to your ADSL line. Connect your ADSL line to this port. 7. Eth ernet P orts The Ether net ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4.
7 6 Connecting your Router 7 6 Connecting your Router Po siti oning y our Ro uter Y our wireless connection will be stronger the closer your computer is to your Router . T ypical indoor operating range for your wireless devices is between 100 and 200 feet.
7 Connecting your Router 7 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Con nect ing yo ur Com puter s 1. Power off your computers and networking equipment. 2.
9 8 Connecting your Router 9 8 Connecting your Router Con nect ing yo ur ADS L Li ne Connection for the Router to the ADSL line varies by country and region. T ypically it involves a microfilter or a micr ofilter with built-in splitter to allow simultaneous use of ADSL service and telephone service on the same telephone line.
9 9 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Note: One RJ11 telephone cord is supplied. When inserting an RJ11 plug, be sur e the tab on the plug clicks into position to ensure that it is properly seated.
11 10 11 10 Po wer ing Up y our Rou ter 1. Connect the supplied power adapter to the Router power-input plug labeled “Power”. Note: For safety and performance reasons, only use the supplied power adapter to pr event damage to the Router .
11 Setting Up your Computers 11 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 In order for your computer to properly communicate with your Router , you will need to change your computer’ s “TCP/IP Ether net” settings to “Obtain an IP address automatically/Using DHCP”.
13 12 Setting Up your Computers 13 12 Setting Up your Computers Manuall y Configuring Network Adapters in Windows 98SE or Me 1. Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu. 2. Select “TCP/IP -> settings” for your installed network adapter .
13 Setting Up your Computers 13 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Set up the computer that is connected to the cable or DSL modem by FIRST using these steps. Y ou can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet.
15 14 Setting Up your Computers 15 14 Setting Up your Computers 5. Close the window . If you made any changes, the following window will appear . Click “Save”. Restart the computer . When the computer r estarts, your network settings are now configured for use with the Router .
15 Setting Up your Computers 15 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Man uall y Confi guri ng Netw ork Ad apte rs in Ma c OS X 1. Click on the “System Preferences” icon. 2. Select “Network” (1) from the “System Preferences” menu. 3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.
17 16 Setting Up your Computers 17 16 Setting Up your Computers 4. Select the “TCP/IP” tab (3) . Next to “Configure” (4) , you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT selected.
17 Setting Up your Computers 17 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Rec om mende d W eb Br o wser Se tting s In most cases, you will not need to make any changes to your web browser’ s settings.
19 18 19 18 4. Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server”. Click “OK”. Then click “OK” again in the “Internet Options” page.
19 Configuring your Router with the Setup Wizar d 19 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Run ning th e Setup Wi zar d 1. Y ou can access the web-based management user interface of the Router using the Internet browser on a computer connected to the Router .
21 20 Configuring your Router with the Setup Wizar d 21 20 Configuring your Router with the Setup Wizar d 3. The Setup Wizard will start automatically for express configuration (recommended) Click “Next” to continue. 4. The first step is to select your country and ISP, and click “Next”.
21 Configuring your Router with the Setup Wizar d 21 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 6. Now the Wireless LAN Setup screen will show. You can connect to the Router via a wireless-LAN-enabled comp.
23 22 23 22 7. Double-check the settings shown on the following screen. You can click “Back” to change the settings or click “Next” to confirm Note: You can always restart the Setup Wizard or use the Navigation Menu on the left to change your setting.
23 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 23 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Configuring Y our Router with the Setup Wizar d Understanding the Web-Based User Interf ace The home page shows you a quick view of the Router’ s status and settings.
25 24 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 25 24 M an ua l l y C on f ig ur i ng y ou r Ro ut e r take you to a separate login page where you will need to enter a password. When you are logged into the Router , you can make changes to the settings.
25 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 25 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Cha ngin g LAN Set ting s All settings for the internal LAN setup of the Router can be viewed and changed here.
27 26 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 27 26 M an ua l l y C on f ig ur i ng y ou r Ro ut e r (1) (2) (3) (4) (5) (6) 1. IP Add re ss The “IP address” is the inter nal IP address of the Router . The default IP addr ess is “192.168.
27 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 27 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 2–100 (99 computers). If you want to change this number , you can do so by entering a new starting and ending IP address and clicking on “Apply Changes”.
29 28 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 29 28 M an ua l l y C on f ig ur i ng y ou r Ro ut e r DHCP Client List Y ou can view a list of the computers (known as clients), which ar e connected to your network.
29 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 29 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Connectio.
31 30 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 31 30 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Set ting y our ISP Co nnec tion T ype to PP PoE or PP PoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices.
31 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 31 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Setting your Connection Type to Dynamic IP (1483 Bridged) This connection method bridges your network and ISP’ s network together .
33 32 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 33 32 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Setting your ISP Connection to Static IP (IPoA) This connection type is also called “Classical IP over A TM” or “CLIP”, which your ISP pr ovides a fixed IP for your Router to connect to the Inter net.
33 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 33 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Setting your Connection Type to Modem Onl y (Disabl e Internet Sharing) In this mode, the Router simply acts as a bridge passing packets across the DSL port.
35 34 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 35 34 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Wir eless The “W irele ss” tab let s yo u ma ke change s to the wir eless net work sett ings. Fr om this ta b, you can make cha nges to the wir eles s ne twork nam e (S SID), ope rating chan nel, and enc ryptio n se curity set tings.
35 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 35 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 2. Cha nging th e Wir el ess Netw ork Na me (SSI D) T o ide ntify you r wirel ess netwo rk, a name cal led the SSID (S ervice Set Ide ntifie r) is use d.
37 36 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 37 36 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 4. Usi ng the Wir ele ss Mode Swi tch Y ou r r outer can ope rate in eith er two dif fer ent wir eless mod es: • 802. 11b & 802.1 1g- Choos e th is option if you pla n to hav e wirel ess clien ts of bot h 80 2.
37 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 37 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Enc rypt .
39 38 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 39 38 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 128-Bit WEP As a result of 64-bit WEP’ s potential security weaknesses, 128Bit WEP was developed as a more secure method of encryption.
39 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 39 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 WP A (Wi-Fi Prot ected Acc ess) WP A (Wi-Fi Protected Access) is a new Wi-Fi standard that was designed to improve upon the security features of WEP .
41 40 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 41 40 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Sharing the Same Network Keys Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WP A and make sure your wireless networking devices are sharing the same Network key .
41 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 41 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Using a Hexadecimal Key A hexadecimal key is a mixture of numbers and letters from A–F and 0–9.
43 42 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 43 42 M an ua l l y C on f ig ur i ng y ou r Ro ut e r WEP Se tup 64-Bit WEP Encryption 1. Select “64-bit WEP” from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually .
43 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 43 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 128-Bit WEP Encryption 1. Select “128-bit WEP” from the drop-down menu.
45 44 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 45 44 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Changing the Wir eless Security Settings Y our Router is equipped with WP A (Wi-Fi Protected Access), the latest wireless security standard. It also supports the legacy security standard, WEP (Wired Equivalent Privacy).
45 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 45 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Setting WPA-PSK (no server) 1. From the “Security Mode” drop-down menu, select “WP A-PSK (no server)”.
47 46 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 47 46 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Setting WPA (with radius server) Settings If your network uses a radius server to distribute keys to the clients, use this setting. 1. From the “Security Mode” drop-down menu, select “WP A—Radius server)”.
47 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 47 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Connecting your Computer to a Wirel ess Network that Requires a 64-Bit or 128-Bit WEP Key 1.
49 48 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 49 48 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Connecting your Computer to a Wirel ess Network that Requires WP A-PSK (no server) 1. Double-click the “Signal Indicator” icon to bring up the “Wireless Network” screen.
49 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 49 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Connecting your Computer to a Wirel ess Network that Requires WP A (with radius server) 1.
51 50 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 51 50 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Im por ta nt: Y ou als o ne ed to ens ur e tha t th e wir el ess car d ma nuf act ur er s upp ort s WP A an d th at yo u ha ve do wnl oad ed a nd i nst all ed th e la tes t dri ver fr om th eir sup por t si te.
51 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 51 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 6. Se lec t “T KIP ” or “ AES ” un der “ Dat a Enc ryp tio n”.
53 52 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 53 52 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 1 Wireless channels must match between Router and AP .
53 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 53 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Virtual S.
55 54 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 55 54 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times.
55 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 55 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 DMZ (Demi.
57 56 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 57 56 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Uti liti es The “Utilities” screen lets you manage differ ent parameters of the Router and perform certain administrative functions.
57 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 57 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Restarting the Router to Rest ore Normal Operation 1. Click the “Restart Router” button.
59 58 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 59 58 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Saving/Backup Current Settings Y ou can save your current configuration by using this featur e. Saving your configuration will allow you to restore it later if your settings are lost or changed.
59 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 59 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 3. When the save is complete, you will see the window below .
61 60 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 61 60 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Firmwar e Update From time to time, Belkin may release new versions of the Router’ s firmware. Firmware updates contain feature improvements and fixes to problems that may have existed.
61 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 61 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 System Se.
63 62 M an ua l l y C on f ig ur i ng y ou r Ro ut e r 63 62 M an ua l l y C on f ig ur i ng y ou r Ro ut e r Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server . This allows the Router to synchronize the system clock to the global Internet.
63 M an ua l l y C on f ig ur i ng y ou r Ro ut e r M an ua l l y C on f ig ur i ng y ou r Ro ut e r 63 M an ua l l y C on f ig ur i ng y ou r Ro ut e r section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Click on the “Apply Changes” button to save your settings.
65 64 T r oubl eshooting 65 64 T r oubl eshooting Pr obl em: The ADSL LED is not on. Sol ution: 1. Check the connection between the Router and ADSL line. Make sure the cable from the ADSL line is connected to the port on the Router labeled “DSL Line”.
65 T r oubl eshooting 65 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Pr obl em: My wireless PC cannot connect to the Router . Sol ution: 1. Make sure the wireless PC has the same SSID settings as the Router , and you have the same security settings on the clients such as WP A or WEP encryption.
67 66 T r oubl eshooting 67 66 T r oubl eshooting Does the name of your wireless network appear in the results? Y es, my network name is listed —go to the troubleshooting solution titled “I can’ t connect to the Internet wir elessly , but my network name is listed”.
67 T r oubl eshooting 67 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 correct network name now appears under “Available Networks”, you may have a range or interference problem. Please see the suggestions discussed in Appendix B entitled “Important Factors for Placement and Setup”.
69 68 T r oubl eshooting 69 68 T r oubl eshooting Limiting the wir eless transmit rat e - Limiting the wireless transmit rate can help impr ove the maximum wireless range, and connection stability . Most wireless cards have the ability to limit the transmission rate.
69 T r oubl eshooting 69 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 and 0-9. For 128-bit WEP , you need to enter 26 hex characters. For example: C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key 6. Click “Apply Changes” to finish. Encryption in the Wireless Router is now set.
71 70 T r oubl eshooting 71 70 T r oubl eshooting 5. Under “Data Encryption” select “WEP”. 6. Ensure the check box “The key is provided for me automatically” at the bottom is unchecked. If you are using this computer to connect to a corporate network, please consult your network administrator if this box needs to be checked.
71 T r oubl eshooting 71 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Pr obl em: I am having dif ficulty setting up Wi-Fi Protected Access (WP A) security on a Belkin Wireless Router or Belkin Access Point for a home network. Sol ution: 1. From the “Security Mode” drop-down menu, select “WP A-PSK (no server)”.
73 72 T r oubl eshooting 73 72 T r oubl eshooting Pr obl em: I am having dif ficulty setting up Wi-Fi Protected Access (WP A) security on a Belkin Wireless Card for a home network. Sol ution: Clients must use the same key that the wireless r outer or access point uses.
73 T r oubl eshooting 73 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Utility will appear . This Utility will allow you to manage all the advanced features of the Belkin Wireless Car d. 4. Under the “Wireless Network Properties” tab, select a network name from the “Available networks” list and click the “Properties” button.
75 74 T r oubl eshooting 75 74 T r oubl eshooting 3. Under the “Wireless Networks” tab, click the “Configure” button, and you will see the following screen. 4. For a home or small business user , select “WP A-PSK” under “Network Administration”.
75 T r oubl eshooting 75 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Wir eless Comparison Chart Wireless T echnology 802.11b 802.11g 802.11a Belkin Pre-N Speed 11Mbps 54Mbps 54Mbps 108Mbps Frequency Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.
77 76 T echnical Support Information 77 76 T echnical Support Information T echni cal Sup port For latest software updates or if you have any further questions regar ding installation of this product, please visit www .belki n.c om/ne twork ing or contact: US: 877-736-5771 or 310-898-1100 ext.
77 77 section 2 1 3 4 5 6 7 1 1 1 2 Appendix es 9 8 1 0 App endi x A: Gl ossa ry IP Address The “IP address” is the inter nal IP address of the Router . T o access the advanced setup interface, type this IP address into the address bar of your br owser .
79 78 Appendix es 79 78 Appendix es 3. Y ou have to double-click on a desktop icon other than your browser to get on the Inter net. T o set the Router to use PPPoE, type in your user name and password in the spaces provided. After you have typed in your information, click “Apply Changes”.
79 Appendix es 79 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 ESSID Broadcas t Many wireless network adapters currently on the market possess a feature known as site survey . It scans the air for any available network and allows each computer to automatically select a network from the survey .
81 80 Appendix es 81 80 Appendix es Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer , a range of computers, or multiple computers.
81 Appendix es 81 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Administrator Passwor d The Router ships with NO password entered. If you wish to add a password for more security , you can set a password from your Router’ s web-based user interface.
83 82 Appendix es 83 82 Appendix es UPnP UPnP (Universal Plug-and-Play) is a technology that offers seamless operation of voice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications requir e the Router’ s firewall to be configured in a specific way to operate properly .
83 Appendix es 83 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 App endi x B: Impo rtan t Fa ctor s fo r Plac eme nt and Se tup Note: While some of the items listed below can affect network performance, they .
85 84 Appendix es 85 84 Appendix es If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’ s path (between your computers and Wir eless Router or access point).
85 Appendix es 85 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 These guidelines should allow you to cover the maximum possible area with your Wireless Router (or access point). Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point.
87 86 87 86 Country Connection Protocol VPI/VCI Encapsulation ISPs Europe France PPPoE 8/35 LLC V arious Germany PPPoE 1/32 LLC T -Online, various Holland 1483 Bridged 0/35 0/3 2 0/34 LLC LLC LLC BBNe.
87 Information 87 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Caution: Exposure to Radio Fr equency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.
89 88 Information 89 88 Information • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver . • Connect the equipment to an outlet on a circuit different from that to which the r eceiver is connected.
89 Information 89 section 2 1 3 4 5 6 7 8 9 1 0 1 1 1 2 Belkin Corporation Limited Lifetime Product W arranty Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime.
Belkin Ltd. Exp ress Busines s P a rk, Shipton Way Rushd en, NN 1 0 6GL, United Kingdom +4 4 (0 ) 1 933 35 2000 +4 4 (0 ) 1 933 31 200 0 fax Belkin B. V .
An important point after buying a device Belkin Pre-N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin Pre-N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin Pre-N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin Pre-N you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin Pre-N will certainly help you make a decision on the purchase.
If you already are a holder of Belkin Pre-N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin Pre-N.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin Pre-N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin Pre-N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
