Instruction/ maintenance manual of the product ARC 4330 WH Whirlpool
Go to page of 18
21 INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE ............................... ..... PAGE 22 SAFEGUARDING THE ENVIRONMENT ................. ........ PAGE 22 PRECAUTIONS AND GENERAL RECOMMENDATIONS ................. ................................
22 BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT • Your new appliance is designed exclusively for domestic use. To ensure best use of your appliance , carefully read the op erating i nstructio ns which contai n a description o f the produc t and useful ad vice.
23 PRECAUTIONS AND GENERAL RECOMMENDATIONS INSTALLATION • The appliance must be han dled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, ma ke sure the appliance does not damage the power cable.
24 PRODUCT DESCRIPTION 1. Fast freezing compartment 2. Ice cube tray 3. Ice compartment 4. Freezer thermostat 5. Freezer shelf 6. Fresh control compartment 7. Refrigerator thermostat 8. Refrigerator s helves 9. Crisper drawer 10. Freezer shelf 11. Egg tray 12.
25 REFRIGERATOR COMPARTMENT This appliance is equipped with a No Frost syst em that do es not requir e manual defro sting. The appliance is also provided with a ventilated syst em, thanks to which the internal temperature is to all intents and purposes uniform.
26 FRESH CONTROL COMPARTMENT This sliding compartment stays colder than the rest of the refrigerator compartment to keep daily foods fresh longer. It is proper for keeping dairy p rod ucts, cold cuts, sausage and meat. If necessary, remove the fresh control compartment for cleaning.
27 MOISTURE CONTROL (depe nding on the model) The fruit and vegetables drawer is provided with a moisture control that allows you to control the necessary amount of air th at goes into the drawer. • We recommend to keep the control closed to preserve leafy vegetables and open to preserve fruit.
28 FREEZER COMPARTMENT TO REPLACE THE CRISPER DRAWER LID First step: rep lacing the crisper draw er lid • Insert the back of the lid into the runners.
29 ICE CUBES • Take out the ice cube tray. • Fill it with water to the indicated level. • Replace the ice cube tray in its original position. • When the ice cubes are ready, turn the knob to drop them into the ice bin. Do not fill the ice bin with water.
30 GUIDE TO STORAGE AND THAWING OF FOOD PREP ARING FRESH FOOD FOR FREEZING It is important to wrap food so that no water, moistu re, or vapour may penetrate; this avoids the transfer of odours and flavours throughout the refrigerator an d allows better storage of frozen food.
31 FOOD STOR AGE CHART Storage time will vary according to the quality of the food, the type of packaging or wrap used (moisture and vapour proof), and the storage temperature (which should be -18°C).
32 CARE AND MAINTENANCE INSTALLATION Freestanding appliances (not built-in) • Fit the spacers (if suppli ed) on the rear o f the condenser positioned at the back of the appliance (see figure); alternatively, leave a space of at least 6 cm between the rear of the appliance and the wall.
33 DOOR REVERSIBILITY 1. Unscrew the two screws which are fixing the middle hinge. Also remove the two big caps on the left. (FIG-1) 2. Dismantle the refrigerator and frezeer door from cabinet by pulling towards to you together with the middle hinge. (FIG-2) 3.
34 6. Assemble the top hinge and hinge cover on the left side. (FIG-6) 7. Replace the top bushing and top bushing cap. (FIG-7) (You can use the bushing cap that is put in the user manuel bag) Remove the bottom bushing and bottom stopper and assemble it to the left side.
35 VACATION Short vaca tion There is no need to disconnect the refrigerator from the power supply if you will be away for less than three weeks. Use up perishable food, freeze other food. Long vacation Remove all the food if you are going away for three weeks or more.
36 TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE Some noises are normal when the appliance is operating Before contacting After-sales Serv ice.... Performance problems often result from little things you can find and fix yourself without tools of any kind.
37 AFTER SALES SERVICE Before contacting After S ales Service: 1. See if you can solve the problem yourself (see “TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE”).
38 ELECTRICAL CONNECTION 1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this applia nce is fitted with a BS 13 63A 13amp fused plug, to change a fuse in this type of plug use an A. S . T .A . a pp r o v e d f u s e to B S 13 6 2 ty p e a n d p r o c ee d a s f o l l ow s : 1.
An important point after buying a device Whirlpool ARC 4330 WH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool ARC 4330 WH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool ARC 4330 WH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool ARC 4330 WH you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool ARC 4330 WH will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool ARC 4330 WH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool ARC 4330 WH.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool ARC 4330 WH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool ARC 4330 WH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
