Instruction/ maintenance manual of the product ADP 5300 Whirlpool
Go to page of 9
Whirl pool Switze rland, www.w hirlpool. ch Bauknech t AG, Industrie strasse 36 , 5600 Le nzburg, www .bauknecht.ch Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.
GB -1- Chart PROGRAM SELECTION BUTTON Push “Programs” button (repeatedly) until the indicator of the required program lights up (see “Table of programs” below). ST ART/RESUME BUTTON Push this button to start the selected program: the indicator lights up and goes off at the end of the program.
GB -2- First time use 1- salt reservoir 2- rinse aid dispenser 3- detergent dispenser 4- racks sys tem 5,6,7,8- available functions on the panel 9- filters 10- spray arms 1.
GB -3- Daily check 3 Check the rinse aid indicator to check the level into the dispenser . (depending on the model) Rinse aid indicator on the control panel Rinse aid indicator on the dispenser The indicator lamp lights up when RINSE AID NEEDS TO BE ADDED.
GB -4- How to load the racks E - OPEN (depending on the model) F - Foldable plate holders: They can be folded down to load pots or G - Fixed plate holders H - Cutlery basket (or I model) J - Grid: Helps to keep the cutlery separate for better washing results.
GB -5- Switch off the appliance Everything o.k. ... W ash cycle Select program 6 7 8 Exercise caution when opening the door: beware of hot steam. Press the CANCEL/Off button once to turn the appliance into Standby mode. All the indicator lamps switch off.
GB -6- What to do if ... If a fault occurs , before contactin g the After-sa les Service, make the following checks to try and remedy the problem. Most faults can be remedied by ta king the courses of action, quic kly restoring normal appliance operation.
GB -7- What to do if ... Crockery and cutlery ... P ossible causes... Solutions... ...salt indicator lit - Use tablets for soft water . - Set “T ablet” option; if this optio n is not availabl e, it is normal for the sa lt indicator to light up. ..
GB -8- What to do if ... If, after carrying out the above checks, the fault persists, discon nect the mains plug and turn off the water tap. Contact the A fter-sales Servic e (see warranty).
An important point after buying a device Whirlpool ADP 5300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool ADP 5300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool ADP 5300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool ADP 5300 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool ADP 5300 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool ADP 5300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool ADP 5300.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool ADP 5300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool ADP 5300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
