Instruction/ maintenance manual of the product ADG 8200 IX Whirlpool
Go to page of 8
GB -1- Chart PROGRAM SELECTION BUTTON Push “Programs” button (repeatedly) until the indicator of the required program lights up (see “Table of programs” below). (see at right for options description) ST ART/RESUME BUTTON Push this button to start the selected program: the indicator lights up and goes off at the end of the program.
GB -2- First time use 1- salt reservoir 2- rinse aid dispenser 3- detergent dispenser 4- racks sys tem 5,6,7,8- available functions on the panel 9- filters 10- spray arms W ater hardness should be set only before the first wash or if water hardness has been changed 1 Visual indicator (depending on the model).
GB -3- Daily check 3 Check the rinse aid indicator to check the level into the dispenser . (depending on the model) Rinse aid indicator on the control panel Rinse aid indicator on the dispenser The indicator lamp lights up when RINSE AID NEEDS TO BE ADDED.
GB -4- How to load the racks D - OPEN (depending on the model) E - Foldable plate holders: they can be folded down to load pots or Fixed plate holders F - Cutlery basket: slide halves apart to split the basket. G - Grid: helps to keep the cutlery separate for better washing results.
GB -5- Switching off the applia nce. Everything OK... W ash cycle Select program 6 7 8 Maintenance and care Maintenance and care Overview of programs The max. possible number of programs is illustrated in the chap ter “Chart”. The corresponding pr ograms for your appliance can be found on the panel (page 1).
GB -6- What to do if ... If a fault occurs, before contactin g th e After-sales Service, make the followin g checks to try and remedy the problem. Most faults can be remedied by taking the following courses of action, quickly restoring normal applianc e operation.
GB -7- What to do if ... Crockery and cutlery ... P ossible causes... Solutions... ...salt indicator lit - Use tablets for soft water . - Set “T ablet” option; if this option is not availabl e, it is normal for the salt indicator to light up. ...have deposits: regeneration salt residue - W ater too hard.
GB -8- What to do if ... If, after carrying out the above checks, the fault persists , disconnect the mains plug and tu rn off the water tap. Contact the After-sales Servic e (see warranty).
An important point after buying a device Whirlpool ADG 8200 IX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool ADG 8200 IX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool ADG 8200 IX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool ADG 8200 IX you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool ADG 8200 IX will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool ADG 8200 IX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool ADG 8200 IX.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool ADG 8200 IX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool ADG 8200 IX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
