Instruction/ maintenance manual of the product ADG 6370 IX Whirlpool
Go to page of 10
59 INSTRUCTIONS FOR USE BEFORE USING THE DISHWASHER/ CONNECTIONS ELECTRICAL CONNECTION PRECAUTIONS AND GENERAL RECOMMENDATIONS HOW TO FILL THE SALT CONTAINER HOW TO FILL THE RINSE AID DISPENSER HOW TO.
60 BEFORE USING THE DISHWASHER/ CONNECTIONS 1. Removing the packaging and controls: After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly . If in doubt, contact a qualified technician or your local retailer . • Keep the packaging mater ials (plastic bags , polystyrene parts, etc.
61 ELECTRICAL CONNECTION 1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this applianc e is fitted with a BS 1363A 13amp fused plug, to change a fuse in th is type of plug use an A.S.T.A. approved fuse to BS 1362 ty pe and proceed as follows: 1.
62 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing: The packing box may be fully recycled as confirmed by the recycling symbol . 2. Energy and water saving tips: • Do not rinse crockery under running water.
63 HOW TO FILL THE SALT CONTAINER From a water hardness category of 1–2 (medium), before using the dishwasher, fill the salt container with regeneration salt (to find out the hardness level of water in your area , contact your local Water Board or check the last bill you received).
64 HOW TO FILL THE RINSE AID DISPENSER (Not necessary when using a combined action detergent) The rinse aid facilitates drying and prevents the formation of unsightly spots and streaks on crockery. Befo re using the dish washer for the first time, fill the rinse aid dispense r.
65 HOW TO FILL THE DETERGENT DISPENSER Only use detergents recommended fo r use in domestic dishwashers. Only fill the detergent dispen ser prior to starting a wash programme (see the Quick Reference Guide). 1. Press button C to open the cover. 2. How to fill the detergent dispenser.
66 CARE AND MAINTENANCE Before cleaning or carrying out maintenance, switch off the appliance, disconnect the mains plug and turn off the water tap. Cleaning the outsid e of the appliance: To clean the outside of the applia nce, use a neutral detergent and a damp cloth.
67 CARE AND MAINTENANCE Cleaning the filters 1. Rotate the microfilter counter-clock wise (in the direction of the arrow “0” ) and extract it ( E ). 2. Remove the wide-mesh filter ( F ). 3. Remove the fine-mesh filter ( G ). 4. Clean all filters un der running water, paying attention not to bend the fine-mesh filter.
Printed in Germany 1/1205 Ecological Paper CZ SK H RUS BG RO GB PL 5019 396 94173.
An important point after buying a device Whirlpool ADG 6370 IX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool ADG 6370 IX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool ADG 6370 IX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool ADG 6370 IX you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool ADG 6370 IX will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool ADG 6370 IX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool ADG 6370 IX.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool ADG 6370 IX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool ADG 6370 IX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
