Instruction/ maintenance manual of the product ADG 6240 FD Whirlpool
Go to page of 8
GB -1- Chart PROGRAM SELE CTION BUTTON Push “Program s” button (repeatedly) until the indicator of the required program lights up (see “Table of progr ams” below). (see at right for options descripti on) ST ART/RESUME BUTTON Push this button to start the selected program: the indicator lights up and goes o ff at the end of the program.
GB -2- First time use 1- salt reservoir 2- rinse aid dispenser 3- detergent dispenser 4- racks system 5,6,7,8- available functions on the panel 9- filters 10- spray arms W ater hardness should be set only before the first wash or if water hardness has been changed 1 Visual indicator (depending on the model).
GB -3- Daily check 3 Check the rinse aid indicator to check the level into the dispenser . (depending on the model) Rinse aid indicator on the control panel Rinse aid indicator on th e dispenser The indicato r lamp lights up when RINSE AID NEED S TO BE ADDED.
GB -4- How to load the racks D - OPEN L OWER RACK - depending on th e model 4 A - Adjustable flaps ( 2 o r 4 ) : i n h o r i z o n t a l p o s i t i o n f o r cups/long utensils/stemmed glasses. B - Cutlery basket: can be pl aced in the upp er r ack wh en the “Half load /Multizone ” option is selected .
GB -5- Switching off the applianc e. Everything OK... W ash cycle Select program 6 7 8 Maintenance and care Maintenance and care Overview of programs The max. possible number of programs is il lustrated in the chapter “Chart”. The corresponding prog rams for your applia nce can b e found on the panel (page 1).
GB -6- What to do if ... If a fault occurs, before contacting th e Aft er -sales Service, make the followin g checks to tr y and remedy the problem. Most fault s can be remedied by taking the foll owing cour ses of action, quickly restorin g norm al appliance operation.
GB -7- What to do if ... Crockery and cutlery ... P ossible causes... Solutions... ...salt i ndicato r lit - Use tablets for soft water . - Set “ T ablet” option; i f this option is not available, it is normal for the sa lt indicator to light up. .
GB -8- What to do if ... If , after carrying o ut the above che cks, the fault p ersists, disc onnect the mains plug and turn off the water tap. Contact the After -sales Service (see warranty).
An important point after buying a device Whirlpool ADG 6240 FD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool ADG 6240 FD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool ADG 6240 FD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool ADG 6240 FD you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool ADG 6240 FD will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool ADG 6240 FD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool ADG 6240 FD.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool ADG 6240 FD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool ADG 6240 FD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
