Instruction/ maintenance manual of the product 8523781 Whirlpool
Go to page of 8
Quic k Ref er ence T able of Cont ents: If r ang e does not oper ate: Check that the circuit breaker is not tripped or the house fuse blown. Check that the power supply cord is plugged into the wall receptacle. Check that gas line is turned on.
Page 2 Pr oduct dimensions Bef or e you star t... Cabinet dimensions/r equir ements Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
Page 3 Electr ical r equir ements Gas supply r equir ements Observe all governing codes and ordinances. This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.
Page 4 Installation st eps 1. Put on safety glasses and gloves. Do Not use oven door handle to lift or move the range. Pr epar ation A 2. Remove oven racks and parts package from inside oven. Remove shipping materials, tape and protective film from range.
Oper ating position C 5. Remove cardboard shipping base from under range. Open broiler drawer. Use a 3/8" drive ratchet to lower rear leveling legs one- half turn. Use channel lock pliers to lower front leveling legs one-half turn. 7. If installing the range in a mobile home, you MUST secure the range to the floor.
15 . Push in and turn each surface unit control knob to “LIGHT” position. The flame should light within 4 seconds. Turn control knob to “HIGH” position after burner lights. Check each cooktop burner for proper flame. The small inner cone should have a very distinct blue flame 1/4" to 1/2" long.
Gas conversions (from Natural gas to L.P. gas; or from L.P. gas to Natural gas) must be done by a qualified installer. L.P . g as con v ersion 1. Complete installation sections A-C (Pages 4-5) before converting cooktop to L.P. gas. Check that main gas supply line has been shut off and the power supply cord is disconnected.
Nat ur al g as con v ersion 1. Check that main gas supply line has been shut off and the power supply cord is disconnected. DO NOT REMOVE THE PRESSURE REGULATOR. 2. Open broiler drawer to locate pressure regulator. Pressure regulator: Remove plastic cover.
An important point after buying a device Whirlpool 8523781 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 8523781 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 8523781 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 8523781 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 8523781 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 8523781, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 8523781.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 8523781. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 8523781 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
