Instruction/ maintenance manual of the product 60-Hz Models Whirlpool
Go to page of 5
IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave lnstallatlon Instructions with the homeowner, Homeowner: Keep Installation Instructions for future reference Save Installation Instructions for local electrical inspector’s use >art No.
Before you start... Untape and open washer lid. Remove packages, hoses, and literature rack from washer. Hot and cold water faucets: Must be within 4 feet (122 centimeters) of the back of the washer and provide water pressure 5-100 PSI (345689.6 KPa).
Now start... With washer in laundry area, Numbers correspond to steps. Read, then remove label that covers drain connector. Pull to completely remove the shipping strap with 2 cotter pins from the inside of the washer. o remove the other end of shipping strap from the back of the washer.
10 I Carefully tilt washer backwards until front of washer is 3-4 inches (7.5-l 0 centimeters) off of floor. Insert piece of wood as brace. 11 Use legs and nuts from parts n package. Screw nut down to within l/2 inch (1.3 centimeters) of base. Insert legs into correct holes at each front corner of washer until nuts touch washer.
- - - - - - -~ --~ iiistructfons This washer may be installed in a recessed area or closet. The installation spacing is minimum allowable. Additional spacing should be considered for ease of installation and servicing. If closet door is installed, the minimum air openings in top and bottom are required.
An important point after buying a device Whirlpool 60-Hz Models (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 60-Hz Models yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 60-Hz Models - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 60-Hz Models you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 60-Hz Models will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 60-Hz Models, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 60-Hz Models.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 60-Hz Models. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 60-Hz Models along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
