Instruction/ maintenance manual of the product 35-718 Whirlpool
Go to page of 7
IMPORTANT: Read and save these instructions. 30” and 36” Convertible IMPORTANT: Range Hood Installer: Leave Installation Instructions with homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for electrical inspector’s use.
Before you start... Check the location where the range hood will be installed. The location should be Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the clearances specified.
Venting requirements round ductwork Now start... With range hood in kitchen. elbow 3-l/4” x 10” to round ductwork transition Property Damage l Slide cardboard or hardboard under range before moving range across floor. Failure to do so could cause damage to floor covering.
7. terminal bOX cover 6 m Remove terminal box Cover from Mae than one person is required to help with appliance intiallation because Of its weight and size. Failure to tallow these instructions may result in personal injury. Numbers correspond to steps.
_ . !&wlA II If1 green grounding screw Remove terminal box cover. Connect the white and black wires of the power supply cable to the white and black leads in the hood with twist-on connectors, Connect the power supply grounding wire to the green, grounding wire inside the range terminal box with a twist-on wire connector.
Use & Care Information Electrical Shock Hazard l To prevent the risk of electrical shock or injury, be sure to disconnect power before cleaning or servicing. l If any electrical problem becomes evident during use, disconnect power to hood at fuse or breaker box.
If range hood does not operate... Check that the circuit breaker is not tripped or the house fuse blown. If you need assistance... The Whirlpool Consumer Assistance Center will answer any questions about operating or maintaining your range hood not covered in the Installation Instructions.
An important point after buying a device Whirlpool 35-718 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 35-718 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 35-718 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 35-718 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 35-718 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 35-718, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 35-718.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 35-718. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 35-718 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
