Instruction/ maintenance manual of the product 30 eye-level range Whirlpool
Go to page of 8
30" EYE-LEVEL&ROWAVE RANGE 30" EYE-LEVEL RANGE ve Ovens, Compactors, Room Air Conditioners, Dehumidifiers, Automatic Washers, Clothes Dryers, Freezers, Refrigerator-Freezers, Ice Makers,.
II Before you begin Read these instructions completely and carefully. If followed, they will simplify the installation job. If your range does not have a microwave upper oven, disregard the following microwave infor- mation. IMPORTANT: Observe all governing codes and ordinances.
C. Electrical requirements IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR’S USE WARNING: DO NOT PLUG THE “PIGTAIL” POWER CORD INTO A LIVE WALL RECEPTACLE BEFORE CORD IS PERMANENTLY CONNECTED TO THE TERMINAL BLOCK.
Begin the installation Remove racks and all other contents from oven before moving appliance. Be sure to remove all packaging material (cardboard, protective film, etc.) from range before use. A. Remove shipping skid SHIPPING iKID .m..CARDBOARDPADS UNDER APPLIANCE ,.
B. Strain relief required LOCKING , II INSERT FROM UNDER FRAME Disconnect clamping ring from strain relief. Push relief (from bottom) through hole beneath terminal block. Tighten clamping ring (from above) onto strain relief threads. W-m _--,.- is* ~l--T-i+.
/A 1 Level and position Gl ” the range NOTE: If installing the option vent hood, go to that step now. Instructions are on page 7. Level and position the range after the vent hood is attached. I ‘- SPIRIT LEVEL - A. Leveling Move range into fiGI operating position.
7 Installing optional C. Connect vent hood Ll vent hood CAUTION: Disconnect from electrical supply before installing vent hood. A. Space required EYE-LEVEL RANGE Reach through hole in bottom of vent hood, pull out power cord until all slack is removed.
Part No. 313480 Rev. 6 HOME 5% APPLIANCES Making your world a little easier. In the event your WHIRLPOOL appliance should need service, call the dealer from whom you purchased the appliance or a WHIRLPOOL franchised TECH-CARE@ service company.
An important point after buying a device Whirlpool 30 eye-level range (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 30 eye-level range yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 30 eye-level range - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 30 eye-level range you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 30 eye-level range will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 30 eye-level range, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 30 eye-level range.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 30 eye-level range. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 30 eye-level range along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
