Instruction/ maintenance manual of the product 30 Whirlpool
Go to page of 5
IA WARNING l ALL RANGES CAN TIP . INJURY TO PERSONS COULD RESULT . INSTALL ANTI-TIP DEVICE PACKED WITH RANGE . SEE INSTALLATION INSTRUCTIONS IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner.
Before you start... Important: Observe all * Note: 30” min. when bottom of Electrical and gas dimensions Proper installation is your responsibility. A qualified technician must install this range. Make sure you have everything necessary for correct installation.
D n Provide a gas supply line of 3/4” rigid Recommended grounding method pipe to the range location. -A smaller size- pipe on long runs may result in insufficient gas supply. Pipe-joint compounds made for use with L.P. gas must be used. With L.P. gas, piping or tubing size can be l/2” minimum.
17 w Push in and turn the control knob to the “LITE” position blue flame. To adjust the burner, remove the control knob and turn the adjustment screw in the center of the valve stem. Check the adjustment by turning the control knob from “HI” to “LO” several times.
B w Convert surface burner valves, (all Oven thermostat adjustment - models). Standing Pilot System only Lift and lock cooktop in up position. Use l/2” wrench to turn spud counterclockwise until snug (approximately 2-l /2 turns). Do Not over-tighten.
An important point after buying a device Whirlpool 30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 30 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 30 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 30.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
