Instruction/ maintenance manual of the product 25RI-D4 Whirlpool
Go to page of 10
4 INSTRUCTIONS FOR USE Pa g e BEFORE USING THE APPLIANCE 5 SAFEGU ARDING THE ENVIRONMENT 5 PRECA UTIONS AND GENERAL 6 RECOMMEND A TIONS IF THE APPLIANCE IS NOT GOING TO BE USED 7 MAINTENANCE AND CLEAN.
5 BEFORE USING THE APPLIANCE • Y our new appliance is designed exclusively for domestic use. T o ensure best use of your appliance, carefully read the operating instructions which contain a description of the product and useful advice. Keep these instructions for future reference.
6 INST ALLA TION • The appliance must be handled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sure the appliance does not damage the power cable.
7 P eriodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent specific for refrigerator interiors. Never use detergents or abrasives. • Do not use steam cleaners. • Clean the condenser using a vacuum cleaner , remove the front kickplate (see installation handbook).
8 GUIDE TO THE INSIDE P ARTS FRESH FOOD COMP ARTMENT (if available) The fresh food compartment has a tilting movement that facilitates the introduction and the removal of food.
After switching on the refrigerator , it usually takes overnight for the first ice cubes to form. When selecting crushed ice, the cubes are crushed just before being dispensed, therefore the crushed ice may come out with a slight delay . Noise from the ice crusher is normal, and pieces of ice may vary in size.
10 Before contacting the After-sales Service… Operation problems are often due to minor causes that can be found and fixed without using any tools. Noises from appliances are normal since the fans and compressors for controlling its operation switch on and off automatically .
11 If there is water in the defrost pan: • This is normal in hot and humid weather . The pan can even be half full. Make sure the refrigerator is level so that water does not spill from the pan.
12 Before contacting the After-sales Service: Switch the appliance on again to see if the problem has been solved. If it has not, switch off the appliance again and repeat the operation after one hour .
13 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1.
An important point after buying a device Whirlpool 25RI-D4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 25RI-D4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 25RI-D4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 25RI-D4 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 25RI-D4 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 25RI-D4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 25RI-D4.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 25RI-D4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 25RI-D4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
