Instruction/ maintenance manual of the product 220038-L 010 Whirlpool
Go to page of 5
IMPORTANT: Read and save Part No. 220038-l 010 Rev. l/4372281 Rev. A these instructions. I I 40” Electric IMPORTANT Installer: Leave Installation Instructions with the appliance. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.
Before you start... Proper installation is the installer’s Check location where range will be installed. The range should be located for convenient use in kitchen. responsibility. A qualified technician should install this range. Make sure you have every-thing necessary for correct installation.
F n FOR MOBILE HOME USE, A 4-WIRE POWER CORD MUST BE USED. This appliance is manufactured with ground connected to cabinet. The ground must be revised so the green grounding wire of the 4-wire power cord is connected to the cabinet. See 4-wire electrical connection section, Panel C.
4-wire electrical connection Use this wiring method for mobile homes and whenever 4-wire installation is required. positioned against the wall), mark on the floor where the back edge of the range will be. Place template on the floor and align side of template with the line marked on the floor.
If the range does For cleaning and not operate... Check that the circuit breaker is not tripped or the fuse blown, Check that power supply cord is plugged into wall receptacle. q operating lnstructlons and cleaning maintenance... If removing the range is necessary for cleaning and maintenance, disconnect electrical supply.
An important point after buying a device Whirlpool 220038-L 010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 220038-L 010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 220038-L 010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 220038-L 010 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 220038-L 010 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 220038-L 010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 220038-L 010.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 220038-L 010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 220038-L 010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
