Instruction/ maintenance manual of the product 20RI-D4 ESPRESSO Whirlpool
Go to page of 19
3 INSTRUCTIONS FOR USE BEFORE USING THE APPLIANCE SAFEGU ARDING THE ENVIRONMENT PRECA UTIONS AND GENERAL RECOMMEND A TIONS IF THE APPLIANCE IS NOT GOING TO BE USED MAINTENANCE AND CLEANING STORING, FR.
4 BEFORE USING THE APPLIANCE Y our new appliance is designed exclusively for domestic use. After unpacking the appliance, make sure it is not damaged and that the door closes properly . Any damage must be reported to the dealer within 24 hours of delivery of the appliance.
5 INST ALLA TION • The appliance must be handled and installed by two or more persons. • Be careful not to damage the floors (e.g. parquet) when moving the appliance. • During installation, make sure the appliance does not damage the power cable.
6 In case of power failures of up to 24 hours Keep the doors of the appliance closed. In this way the stored food will stay cold as long as possible. For further information see chapter “Using the appliance”, section “Black-out alarm”. If the appliance is not going to be used - Disconnect the appliance from the power supply .
7 INTRODUCTION W rap food so that no water , moisture or condensate can enter; this will prevent odours or aromas going from one part to another in the refrigerator , ensuring better preservation of frozen foods. Use plastic containers with hermetic lids, aluminium trays, aluminium foil, plastic film and waterproof plastic wraps.
8 DESCRIPTION OF THE APPLIANCE REFRIGERA TOR COMP ARTMENT A. Inside light B. Inside light C. Adjustable shelf D. Shelf - drawer lid E Crisper F . Crisper adjustment G.
9 Removing and repositioning the refrigerator compartment and freezer shelves. The shelves can be positioned as required. The glass shelves are strong enough to hold bottles, milk cartons and heavy food, however , take care not to bang products on the shelves.
10 FIRST USE Connect the appliance to the water system and power supply (refer to the Installation manual). When connecting the appliance to the power supply , the display will show the temperatures preset by the manufacturer . Note: Reaching the preset temperatures requires a variable amount of time.
11 GUIDE TO SELECTING FUNCTIONS Stand-by This function turns off the refrigerator and freezer compartments. T o activate the standby function, press the button for 3 seconds: both displays will go off and a dash will appear on the left display .
12 ALARMS In the event of an alarm, the acoustic alarm and indicator lights are activated. Important: T o disable the acoustic signal, press the Alarm Reset button. Black-out alarm The alarm black-out activates when a prolonged interruption of the power supply has caused an increase in temperature in the freezer compartment.
13 OPERA TION SYMBOLS 6th Sense Function The icon on indicates that the appliances is in the process of reaching the optimum preservation conditions This function will activate automatically when: • A particularly high quantity of food to be cooled and/or frozen has been placed inside the appliance.
14 OPTIONAL FUNCTIONS Control panel lock function This function prevents accidental changing of appliance settings or switching off . The panel can be locked by pressing both the fast freeze button on.
15 First use When the ice and water dispenser is used for the first time, the first ice cubes and water coming out of the dispenser may have an unpleasant taste and should therefore be discarded. Ice Mode The function is activated when the symbol is lit.
16 After switching on the refrigerator , it usually takes overnight for the first ice cubes to form. When selecting crushed ice, the cubes are crushed just before being dispensed, therefore the crushed ice may come out with a slight delay . Noise from the ice crusher is normal, and pieces of ice may vary in size.
17 1. Locate the water filter cartridge cap below the freezer compartment door . Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille. Note: Since there is water in the cartridge, some spilling may occur .
18 Before contacting the After-sales Service... Operation problems are often due to minor causes that can be found and fixed without using any tools. Noises from the appliance are normal, since the fans and compressors for controlling its operation switch on and off automatically .
19 The appliance does not work: • Is the power cable plugged into a socket powered with the right voltage? • Have you checked the protection devices and fuses of your home’s electrical system? T.
20 If the ice dispenser stops working: • Are the ice cubes stuck because the ice dispenser has not been used for some time? Shake the ice bucket to separate the cubes and increase the holding capacity . It is advisable to throw away the old ice cubes and make new ice.
21 W arning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T .A. approved fuse to BS 1362 type and proceed as follows: 1.
An important point after buying a device Whirlpool 20RI-D4 ESPRESSO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool 20RI-D4 ESPRESSO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool 20RI-D4 ESPRESSO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool 20RI-D4 ESPRESSO you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool 20RI-D4 ESPRESSO will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool 20RI-D4 ESPRESSO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool 20RI-D4 ESPRESSO.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool 20RI-D4 ESPRESSO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool 20RI-D4 ESPRESSO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
