Instruction/ maintenance manual of the product EZ-M 10X2 Wharfedale
Go to page of 14
EZ-m mini-mixer 1 0 x2 OWNER’S MANUAL.
Table of Contents Page 1 Introduction / Features / Back Panel diagram 2 Important Safety & Warranty Information 3 Detailed Features of the EZ-m 10x2 – Mic/Line Input Channel 4 Mono Mic/Line Chan.
I n t rodu c t i on T han k y ou f o r pu rc ha s i ng a W ha r f ed a l e Pr o E Z - m m i n i - m i xer . T he W ha r f ed a l e Pr o E Z -m S e r i e s m i x e r s a r e de s i gned f o r ea s e o f u s e and qua li t y aud i o pe r f o r m an c e .
Important Safety & Warranty Information 1. Power Supply This EZ-m Series mini-mix er is supplie d with an external power supply unit. Use only the power supply provided with your mixer. Use of any ot her power sup ply co uld cause damage to the mixer and other equipment.
DETAILED FEATURES OF THE EZ-m 10x2 Mono Mic / Line Input Channel 3.
Low Impedance (Low Z) MIC Input The low noise, high headroom “Low Z” MIC input is for use with balanced, low impedan ce dynamic micropho nes. NOTE: Condenser microphones will not work on this mixer. LINE IN This ¼” Tip, Ring, Sleeve (TRS) jack is desi gned to be connected with (-1 0 to +4d Bu) balanced or unbalan ced line level sources.
EQ Section Channel 1 on the EZ-m 10x2 mixer features a two band Equalization (” EQ ”) section. Each band is chosen from the prim e frequencies for most musical applications, and allows up to 15 decibels of boost (in crease) or cut (decrea se ) of the signal in the tone range for which it controls.
Stereo Channel Inputs Each of the stereo channel s on the EZ-m 10x2 ( 2/3 and 4/5 ) feature two line level inputs with ¼” Tip/Ring/Sleeve (TRS) jacks for both balanced and unbalanced left and right input signal s. These inputs can accomm odate both stereo and mono inputs.
Master Section The master section on the right side of the mixer controls the final gain stage of the mixed signals from the input channels. The MAIN MIX control allows for the adjustment of the overall output level of the EZ-m mixer. POWER LED & Signal Metering POWER LED This amber LED lights indicating p ower is on for the mixer.
2TK IN This section consists of two sets of three input jacks. The top rows of jacks are the “ 2TK IN ” input, which includes a 1/8” stereo ja ck and left and right RCA jacks.
16 16 POWER Switch – On/Off This slide switch turns the unit on and off. Always power down the EZ-m when it is not in use. Be sure to turn off all syst em amplifiers or powered speakers before turning off the mixer. 17 AC Power Cable Conn ector The included power adapto r con ne cts here.
SPECIFICATIONS EZ-m mini-mixer 10X2 Specifications Maximum Output Level (1%T.H.D. @ 1kHz) +22dBu over 130mw (h ead phone) @ 32 ohms THD+N% <0.01% @ +15dBu Frequency Response 20Hz-20kHz +0/-1dB Hum .
B L O CK D I A G R A M 1 1.
Wharfedale International LTD. IAG HOUSE Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU, England www.wharfe alepro.com IAG Professional reserves the right to a improve specifications wi thout notice.
An important point after buying a device Wharfedale EZ-M 10X2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wharfedale EZ-M 10X2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wharfedale EZ-M 10X2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wharfedale EZ-M 10X2 you will learn all the available features of the product, as well as information on its operation. The information that you get Wharfedale EZ-M 10X2 will certainly help you make a decision on the purchase.
If you already are a holder of Wharfedale EZ-M 10X2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wharfedale EZ-M 10X2.
However, one of the most important roles played by the user manual is to help in solving problems with Wharfedale EZ-M 10X2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wharfedale EZ-M 10X2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
