Instruction/ maintenance manual of the product OmniView Gua de instalacin rpida Belkin
Go to page of 52
xxxxxx 2 Quick Installation Guide, Guide d’installation rapide, Installationsanl eitung, Beknopte inst allatiehandl eiding, Guía de instalación rápida , Guida di installazione rapida F1DW101AeaAS OmniView ® Quad-Bus Server Interf ac e Modul e, USB Sun TM EN FR NL ES DE IT S t a r t H e r e P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 1 9/1/07 5:40:54 pm.
Quick Installation Guide F1DW101AeaAS OmniView ® Quad-Bus Server Interf ac e Modul e, USB Sun TM EN FR NL ES DE IT S t a r t H e r e P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 4 9/1/07 5:41:01 pm.
Package Contents 5 P ackage Contents CA T5e Patch Cable, 6 ft. (A3L791x06-BLU) OmniView Quad- Bus Server Interface Module, USB Sun (F1DW101AeaAS) Quick Installation Guide P74936_F1DW101AeaAS_QIG.
6 Installing your Server Interface Module Step 1 Make sur e your OmniV iew Quad-Bus KVM-over -IP or CA T5 KVM Switch is pr operly installed and is powered of f. Step 2 Make sure your server is power ed of f. Ins talling y our Serv er Interf ac e Modul e P74936_F1DW101AeaAS_QIG.
Installing your Server Interface Module 7 Step 3 Connect the module’ s VGA connector to the monitor port on your server . Step 4 Plug in the USB connector to an available USB port on your server .
8 Installing your Server Interface Module Step 5 Connect the Quad-Bus KVM-over -IP or CA T5 KVM Switch to the Server Interface Module using the included Belkin CA T5e Patch Cable or other CA T5 cable. Step 6 Repeat steps 2 thr ough 5 for each additional USB Sun server you wish to connect.
P74936_F1DW101AeaAS_QIG.indb 9 9/1/07 5:41:06 pm.
OmniView ® Quad-Bus Server Interf ac e Modul e, USB Sun TM P74936ea © 2006 Belkin Corporation. All rights reserved. All trade names are register ed trademarks of respective manufactur ers listed. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Guide d’installation rapide F1DW101AeaAS Modul e d’interfac e serveur Quad-Bus OmniView ® , USB Sun TM EN FR NL ES DE IT C o m m e n c e z i c i P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 12 9/1/07 5:41:10 pm.
Contenu de l’emballage 13 Contenu de l ’emballage Câble de raccordement CA T5e, 1,8 m (A3L791x06-BLU) Module d’interface serveur Quad-Bus OmniView , USB Sun (F1DW101AeaAS) Guide d’installation rapide P74936_F1DW101AeaAS_QIG.
14 Installation du Module d’interface serveur Étape 1 Assurez-vous d’abord que le switch KVM-sur -IP ou CA T5 Quad-Bus OmniView est correctement installé et hors tension. Étape 2 Assur ez-vous que votre serveur est éteint. Ins tallation du Modul e d’interf ac e serv eur P74936_F1DW101AeaAS_QIG.
Installation du Module d’interface serveur 15 Étape 3 Branchez le connecteur VGA du module au port moniteur de votr e serveur . Étape 4 Branchez le connecteur USB à un port USB libr e sur le serveur .
16 Installation du Module d’interface serveur Étape 5 Branchez le Switch KVM-sur -IP ou CA T5 Quad-Bus au Module d’interface serveur à l’aide du Câble de raccordement CA T5e Belkin ou tout autr e câble CA T5. Étape 6 Répétez les étapes 2 à 5 pour chaque ordinateur USB Sun supplémentaire que vous souhaitez connecter .
P74936_F1DW101AeaAS_QIG.indb 17 9/1/07 5:41:14 pm.
Modul e d’interfac e serveur Quad-Bus OmniView ® , USB Sun TM P74936ea © 2006 Belkin Corporation. T ous dr oits réservés. T outes les raisons commerciales sont des marques déposées de leurs fabricants respectifs.
Inst allationsanl eitung F1DW101AeaAS OmniView ® Quad-Bus Serv er- Schnittstell enmodul, USB Sun TM EN FR NL ES DE IT S t a r t P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 20 9/1/07 5:41:18 pm.
V erpackungsinhalt 21 V erpackungsinhalt CA T5e Patch-Kabel, 1,80 m (A3L791x06-BLU) OmniView Quad-Bus Server -Schnittstellenmodul, USB Sun (F1DW101AeaAS) Installations- anleitung P74936_F1DW101AeaAS_QIG.
22 Installation des Server -Schnittstellenmoduls Schritt 1 Stellen Sie sicher , dass Ihr OmniView Quad-Bus KVM-over -IP oder CA T5 KVM-Switch or dnungsgemäß installiert und ausgeschaltet ist. Schritt 2 Stellen Sie sicher , dass der Server abgeschaltet ist.
Installation des Server -Schnittstellenmoduls 23 Schritt 3 Schließen Sie den VGA-Stecker an den Bildschirmanschluss am Server an. Schritt 4 Schließen Sie den USB-Stecker an einen freien USB-Anschluss des Servers an.
24 Installation des Server -Schnittstellenmoduls Schritt 5 Schließen Sie den Quad-Bus KVM-over -IP oder den CA T5 KVM- Switch mit dem enthaltenen CA T5e-Patchkabel von Belkin oder einem ander en CA T5-Kabel an das Server -Schnittstellenmodul an. Schritt 6 Wiederholen Sie Schritt 2 bis 5 für jeden weiteren anzuschließenden USB-Sun-Server .
P74936_F1DW101AeaAS_QIG.indb 25 9/1/07 5:41:23 pm.
OmniView ® Quad-Bus Serv er- Schnittstell enmodul, USB Sun TM P74936ea © 2006 Belkin Corporation. Alle Rechte vorbehalten. Alle Produktnamen sind eingetragene Marken der angegebenen Hersteller . Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, Großbritannien +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Beknopte inst allatiehandl eiding F1DW101AeaAS OmniView ® Quad-Bus server- interf ac emodul e, USB Sun TM EN FR NL ES DE IT H i e r b e g i n n e n P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 28 9/1/07 5:41:27 pm.
Inhoud van de verpakking 29 Inhoud v an de verpakking CA T5e-patchkabel, 1,8 m (A3L791x06-BLU) OmniView Quad-Bus server -interfacemodule, USB Sun (F1DW101AeaAS) Beknopte installatie- handleiding P74936_F1DW101AeaAS_QIG.
30 Installatie van de server -interfacemodule Stap 1 Zor g ervoor dat de OmniView Quad-Bus KVM-over -IP-switch of de CA T5 KVM-switch correct geïnstalleer d en uitgeschakeld is. Stap 2 Zor g ervoor dat de server uitgeschakeld is. Ins tallatie v an de serv er- interf ac emodul e P74936_F1DW101AeaAS_QIG.
Installatie van de server -interfacemodule 31 Stap 3 Sluit de VGA-stekker van de module aan op de monitorpoort van de server . Stap 4 Bevestig de USB-stekker in een vrije USB-poort van de server .
32 Installatie van de server -interfacemodule Stap 5 Sluit de Quad-Bus KVM-over -IP-switch of de CA T5 KVM-switch met de meegelever de CA T5e-patchkabel of een andere CA T5-kabel van Belkin aan op de server -interfacemodule. Stap 6 Herhaal stap 2 tot en met 5 voor elke extra Sun USB-server die u wilt aansluiten.
P74936_F1DW101AeaAS_QIG.indb 33 9/1/07 5:41:32 pm.
OmniView ® Quad-Bus server- interf ac emodul e, USB Sun TM P74936ea © 2006 Belkin Corporation. Alle r echten voorbehouden. Alle handelsnamen zijn ger egistreer de handelsmerken van de betreffende rechthebbenden.
Guía de instalación rápida F1DW101AeaAS Módul o de Interf az de Servidor Quad-Bus OmniView ® , Sun USB TM EN FR NL ES DE IT C o m i e n c e a q u í P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 36 9/1/07 5:41:36 pm.
El packincluye 37 El pack incluy e Cable de red CA T5e de 1,8 m (A3L791x06-BLU) Módulo de Interfaz de Servidor Quad-Bus OmniView , Sun USB (F1DW101AeaAS) Guía de instalación rápida P74936_F1DW101AeaAS_QIG.
38 Instalación del Módulo de Interfaz de Servidor Paso 1 Asegúr ese de que su Conmutador KVM a través de IP Quad-Bus OmniView o su Conmutador KVM CA T5 esté instalado y apagado correctamente. Paso 2 Asegúrese de que su servidor esté apagado. Ins talación del Módul o de Interf az de Servidor P74936_F1DW101AeaAS_QIG.
Instalación del Módulo de Interfaz de Servidor 39 Paso 3 Conecte el conector VGA del módulo al puerto del monitor en el servidor . Paso 4 Conecte el conector USB a uno de los puertos USB disponibles en el servidor . Servidor P74936_F1DW101AeaAS_QIG.
40 Instalación del Módulo de Interfaz de Servidor Paso 5 Conecte el Conmutador KVM a través de IP Quad-Bus o el Conmutador KVM CA T5 al Módulo de Interfaz de Servidor mediante el cable de r ed CA T5e incluido u otro cable CA T5. Paso 6 Repita los pasos del 2 al 5 para cada servidor USB que desee conectar .
P74936_F1DW101AeaAS_QIG.indb 41 9/1/07 5:41:44 pm.
Módul o de Interf az de Servidor Quad-Bus OmniView ® , Sun USB TM P74936ea © 2006 Belkin Corporation. T odos los derechos r eservados. T odos los nombres comerciales son marcas registradas de los respectivos fabricantes mencionados.
Guida di installazione rapida F1DW101AeaAS Modul o di interf ac cia server OmniView ® Quad-Bus, USB Sun TM EN FR NL ES DE IT I n i z i a d a q u i P74936_F1DW101AeaAS_QIG.
P74936_F1DW101AeaAS_QIG.indb 44 9/1/07 5:41:48 pm.
Contenuto della confezione 45 Contenuto della c onf ezione Cavo patch CA T5e, 1,8 m (A3L791x06-BLU) Modulo di interfaccia server OmniV iew Quad-Bus, USB Sun (F1DW101AeaAS) Guida di installazione rapida P74936_F1DW101AeaAS_QIG.
46 Installazione del modulo di interfaccia server F ase 1 Accertarsi che lo switch KVM CA T5 o KVM-over -IP OmniV iew Quad- Bus sia corr ettamente installato e spento. F ase 2 Assicurarsi che il server sia spento. Ins tallazione del modul o di interf ac cia serv er P74936_F1DW101AeaAS_QIG.
Installazione del modulo di interfaccia server 47 F ase 3 Collegar e il connettore VGA del modulo alla porta del monitor sul server . F ase 4 Collegar e il connettore USB ad una porta USB disponibile sul server .
48 Installazione del modulo di interfaccia server F ase 5 Collegar e lo switch KVM CA T5 o KVM-over -IP Quad-Bus al modulo di interfaccia server usando il cavo patch CA T5e Belkin in dotazione o un altro cavo CA T5. F ase 6 Ripeter e le fasi 2-5 per ogni altro server USB Sun che si desidera collegare.
P74936_F1DW101AeaAS_QIG.indb 49 9/1/07 5:41:53 pm.
Modul o di interf ac cia server OmniView ® Quad-Bus, USB Sun TM P74936ea © 2006 Belkin Corporation. T utti i diritti riservati. T utti i nomi commer ciali sono mar chi commer ciali r egistrati dei rispettivi produttori indicati.
P74936_F1DW101AeaAS_QIG.indb 52 9/1/07 5:41:54 pm.
OmniView ® Quad-Bus Server Interf ac e Modul e, USB Sun TM P74936ea © 2006 Belkin Corporation. All rights reserved. All trade names are register ed trademarks of respective manufactur ers listed. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
An important point after buying a device Belkin OmniView Gua de instalacin rpida (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin OmniView Gua de instalacin rpida yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin OmniView Gua de instalacin rpida - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin OmniView Gua de instalacin rpida you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin OmniView Gua de instalacin rpida will certainly help you make a decision on the purchase.
If you already are a holder of Belkin OmniView Gua de instalacin rpida, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin OmniView Gua de instalacin rpida.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin OmniView Gua de instalacin rpida. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin OmniView Gua de instalacin rpida along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
