Instruction/ maintenance manual of the product WETL1214.0 Weslo
Go to page of 24
USER’S MANUAL Serial Number Decal Model No. WETL1214.0 Serial No. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: Or write: ICON Health & Fitness, Ltd.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least 2.
4 22. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative.
5 Thank you for selecting the WESLO ® SPORT 100 treadmill. The SPORT 100 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellen t form o f cardiovascular exercise in t he convenience and privacy of y our h ome.
6 W ARNING: Do not plug in the power cord until the treadmill is completely assembled. 34 34 55 61 61 11 11 11 11 33 33 19 31 31 31 1 1. Orient the Base (55) so the holes for the four Base Pads (31) are on top. Attach the four Base Pads to the Base with the four 1” Tek Screws (11).
7 2. Identify the Left Upright (32) and the Right Upright (37), which has a large round hole near the lower end. S ee drawing 2a. Make sure that there are two U-nuts (93) in the lower end of each Upright (32, 37). See drawing 2b. Have a second person hold the Base ( 55) so it is resting on the Wheels (34) as shown.
8 5. Identify the Right Handrail (5), which has a large hole in t he left side. Feed the Wire Harness (53) into the hole in the bottom of the Right Handrail and out of the large hole i n the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole.
9 49 8 8. Press the Book Rack (49) onto the Console Base (45) in the location shown. 45 7. Place the Console Base (45) on the Right Handrail (5) and the Left Handrail (not shown). Attach the Console B ase with four 3/4” Screws (77) (only two Screws are shown).
32 99 Pin Collar Spring 77 11. Attach the Latch Housing (25) and the Latch Spacer (99) to the Left Upright (32) with two 3/4” Screws (77). Next, remove the latch knob from the latch pin. Make sure that the collar and the spring are on the pin, and insert the pin into the Latch Housing.
1 1 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM ,a high-performance lubricant. IMPOR- TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 11). Next, locate the on/off switch on the side of the treadmill near the power cord. Move the on/off switch to the “on” position.
To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the Time d isplay. N ote: During the first few minutes that the tread- mill is used, inspect the alignment of the walking belt, and align it if necessary (see page 17).
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the t readmill. 1. Hold the treadmill with your hands in the locations shown at the right.
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.
16 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department. PROBLEM: The power does not turn on SOLUTION: a.
17 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor, 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
19 EXERCISE FREQUENCY T o maintain or improve your condition, complete three workouts each week, with at least one day of rest be- tween workouts. After a few months, you may com- plete up to five workouts each week if desired. The key t o success is to make exercise a regular and enjoyable part of your everyday life.
20 NOTES.
P ART LIST—Model No. WETL1214.0 R0305A Key No. Qty. Description 1 1 Hood 2 1 Console 3 1 Motor Belt 4 1 Left Handrail 5 1 Right Handrail 6 1 Motor Isolator 7 1 Motor 8 1 Reed Switch 9 9 Electronics .
46 67 47 82 1 91 91 91 64 86 58 62 52 15 74 15 56 12 16 18 17 15 14 13 56 8 95 75 15 69 72 70 71 83 15 15 60 21 35 9 73 71 71 81 59 84 88 85 10 20 56 80 81 13 85 12 56 62 52 46 25 66 71 70 56 95 30 96 56 56 56 56 56 56 57 43 56 98 103 6 67 47 82 3 63 7 24 80 101 97* 100 29 19 9 44 23 22 27 9 9 9 9 26 102 EXPLODED DRA WING—Model No.
36 36 90 90 2 4 9 50 77 77 92 94 48 45 38 28 89 78 79 76 42 31 11 33 93 77 55 77 4 34 32 86 65 28 89 53 77 5 86 41 41 31 11 31 11 61 33 34 93 28 68 68 28 54 53 31 11 61 37 58 86 25 99 77 87 87 77 40 40 77 EXPLODED DRA WING—Model No.
Part No. 210200 R0305A Printed in USA © 2004 ICON IP, Inc. ORDERING REPLACEMENT P ARTS I f you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd.
An important point after buying a device Weslo WETL1214.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weslo WETL1214.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weslo WETL1214.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weslo WETL1214.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Weslo WETL1214.0 will certainly help you make a decision on the purchase.
If you already are a holder of Weslo WETL1214.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weslo WETL1214.0.
However, one of the most important roles played by the user manual is to help in solving problems with Weslo WETL1214.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weslo WETL1214.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
