Instruction/ maintenance manual of the product D9410 Series Wells-Gardner
Go to page of 11
Wells-Gardner Electr onics Corporation User Manual for D9400 D9410 Series Digital-Control Color Monitor Wells-Gardner Electronics 9500 W. 55th Street Suite A Mc Cook, Il.
Wells-Gardner Electr onics Corporation Picture Tube. • Size: 27V Regular and Flat size to customer requirement • Dot Pitch: .83mm Signal Input. • Video Input: Analog, Positive Signal 4 / 2.2Volts CGA (0.7V p-p)VGA • Horizontal Sync: TTL Level, Po sitive or Negative Pulse • Scanning : 15.
Wells-Gardner Electr onics Corporation FEATURES: I²C BUS control. The monitor is designed with I²C BUS control for simplifying the circuitry. Automatic mode recognition of preset factory modes No control pots to wear out SET UP: Setting up your monitor is easy.
Wells-Gardner Electr onics Corporation CONTROLS AND ADJUSTMENTS: There are fiver switches on the control panel. The adjustable controls allow the best display status fo r individual requirements. 1.0 Key Function. 1. OSD / EXIT OSD – Call the Main-Menu OSD 2.
Wells-Gardner Electr onics Corporation A. ADJUSTMENT PROCEDURE . BRIGHTNESS ADJUSTMENT 1) Press the “OSD” key The Main-Menu OSD will come up as picture d above. 2) Search “BRIGHTNESS” sub-menu using “+ or - FUN” key on the Main-Menu OSD. 3) The “BRIGHTNESS” OSD color changes from blue to red.
Wells-Gardner Electr onics Corporation OTHER “OSD ” ADJUSTMENTS OSD FUN- FUN + KEY - KEY + OSD MENU AND USER FUNCTIONS. • CONTRAST - PICT URE CONTROL ADJUSTMENT SA ME ABOVE • H. POSITION - SCREE N POSITION ADJUSTMEN T SAME ABOVE • V. POSITION - SC REEN POSITION ADJUSTME NT SAME ABOVE • H.
Wells-Gardner Electr onics Corporation COLOR SUBMENU R G B SCREEN COLOR - CO LOR PREFERENCE • COLOR ADJUSTMENT. Factory preset. COLOR 1 - 9300°K: X=0.285, Y=0.293 COLOR 2 - 6500°K: X=0.312, Y=0.329 C O L O R ADJUSTMENT - US ER PREFERENCE 1) Press the “OSD” button to show the Main-Menu OSD.
Wells-Gardner Electr onics Corporation LANGUAGE - USER PREFER ENCE LANGUA GE SELECTION - USER PREFERENCE 1) Press the “OSD” button to show the Main-Menu OSD. 2) SELECT the “LANGUAGE - ICON” by pressing “+ FUN” Key. The language Sub-Menu OSD appears as Shown by the figure above.
Wells-Gardner Electr onics Corporation TIMING CHART: 5 Standard Factory Pre-Set Timing Modes. Can be set to any custom er requirement of 15.75-40Kh z hor and 40-100Hz vert. Timing shown is based on 801GC/GX signal generator CGA MID- RES Mode 3 Mode4 Mode 5 HORIZONTAL 640X240 773X384 640X480 720X400 800X600 VGA_M3 VGA_2 VG900602 Scan freq.
Wells-Gardner Electr onics Corporation.
Wells-Gardner Electr onics Corporation.
An important point after buying a device Wells-Gardner D9410 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wells-Gardner D9410 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wells-Gardner D9410 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wells-Gardner D9410 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Wells-Gardner D9410 Series will certainly help you make a decision on the purchase.
If you already are a holder of Wells-Gardner D9410 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wells-Gardner D9410 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Wells-Gardner D9410 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wells-Gardner D9410 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
