Instruction/ maintenance manual of the product SCANTEAM 6920 Welch Allyn
Go to page of 23
Please Note: Finished document will be 5.5x8.5inches, 3-hole punched, folded and stapled. PC XT–A T–PS/2 Keyboard Wedge Magnetic Stripe Card Reader.
1998 Welch Allyn, Inc. All rights reserved..
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
i T able of Contents T ABLE OF CONTENTS Section Page Statements of Agency Compliance Introduction 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features / Benefits 2 . . . . . . . . . . . . . . . . . . . . . . . . . Applications 3 .
ii T able of Contents Disclaimer W elch Allyn reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult W elch Allyn to determine whether any such changes have been made.
1 SCANTEAM 6920 User ’ s Guide 1 INTRODUCTION TO THE SCANTEAM 6920 Introduction $&#)(' & # #)($)( .
2 SCANTEAM 6920 User ’ s Guide Features / Benefits Compact Size • Mounts easily on keyboard or any flat surface. (hook and loop fastener installation kit included.) Universal PC Keyboard Wedge Interface • No hardware or software modification to PC system required to add magnetic stripe reading capability .
3 SCANTEAM 6920 User ’ s Guide Applications "%& &' &+ ! (%' '.
4 SCANTEAM 6920 User ’ s Guide Installation All SCANTEAM 6920 MSRs are shipped with the configuration set to A T type keyboard scan codes, and set to allow the MSR to autoĆdetect the state of the Caps Lock" key on the host PC .
5 SCANTEAM 6920 User ’ s Guide Output Data Format Note: See DIP Switch Feature Selection chart on page 8 for factory default settings. Single T rack: {PREFIX} {SS} <CARD DA T A> {ES} {SUFFIX} .
6 SCANTEAM 6920 User ’ s Guide Configuration Options: Dip Switch Controlled The SCANTEAM 6920 contains a Dual InĆLine P ackage (DIP) switch pack which is used to configure the operation of the reader . The position of these switches are preĆset by W elch Allyn, and normally do not need to be changed by the user .
7 SCANTEAM 6920 User ’ s Guide Accessing the SCANTEAM 6920 DIP Switch .
8 SCANTEAM 6920 User ’ s Guide Dip Switch Feature Selection ,3#. --#. /# ,+0.,) Setting SW 1 )34/ --#. /# #4 ,." ,+0.
9 SCANTEAM 6920 User ’ s Guide Configuration Options: Keyboard Programming Mode &# %+#0'! 0.'-# #"#. &/ 03, ,-#.0'+% *,"#/ ,.*) -#.0',+ +" #5 ,.
10 SCANTEAM 6920 User ’ s Guide Setting Keystroke Speed to 25, 40, or 60 Characters per Second Use the same procedure as setting keystroke speed to 80 c/s" to set the characters per second to 25, 40, or 60. The keystrokes (at step 4) are: US2<ENTER> for 25 C/S or US4<ENTER> for 40 C/S or US6<ENTER> for 60 C/S.
11 SCANTEAM 6920 User ’ s Guide Setting and Activating a T ransmit Control Character Some applications may require data from the MSR be transmitted automatically after each card swipe. Use this programming feature to set a keyboard character that, when pressed, will transmit MSR data to the host PC .
12 SCANTEAM 6920 User ’ s Guide Setting a Prefix (preamble) Character 1. Turn off power to the host PC . 2. Set MSR DIP switch position 8 to OFF . 3.
13 SCANTEAM 6920 User ’ s Guide Enabling or Disabling T rack Configurations -*' ( )(.* ,( ," "(+, , +.#," )(+#,#(' ,( -*' (' )(.
14 SCANTEAM 6920 User ’ s Guide Displaying a Status Check 2/, -%% .-4$/ 1- 1'$ '-01 $1 04(1"' .-0(1(-, 1- 2/, -, .-4$/ 1- 1'$ '-01 6.
15 SCANTEAM 6920 User ’ s Guide Specifications Recording Method T woĆfrequency coherent phase (F2F), compatible with ISO 7811 Swipe Speed Power Requirements Output Operating T emperatures Operating.
16 SCANTEAM 6920 User ’ s Guide Pin Assignments Model 6920–1, –2 [ and –6 [ Pin # Function " " ! .
Limited W arranty Welch Allyn warrants its products to be functional and free from manufacturing defects at the time of delivery . Welch Allyn warrants that it will replace or repair , at its option, .
6920/U G Rev F S/W : M200B014.HEX, 5F2E.
An important point after buying a device Welch Allyn SCANTEAM 6920 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Welch Allyn SCANTEAM 6920 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Welch Allyn SCANTEAM 6920 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Welch Allyn SCANTEAM 6920 you will learn all the available features of the product, as well as information on its operation. The information that you get Welch Allyn SCANTEAM 6920 will certainly help you make a decision on the purchase.
If you already are a holder of Welch Allyn SCANTEAM 6920, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Welch Allyn SCANTEAM 6920.
However, one of the most important roles played by the user manual is to help in solving problems with Welch Allyn SCANTEAM 6920. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Welch Allyn SCANTEAM 6920 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
