Instruction/ maintenance manual of the product XT20 Weider
Go to page of 16
Model No. 831.153240 Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal (under seat) Visit our website at www .
T ABLE OF CONTENTS W ARNING DECAL PLACEMENT 2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . .
3 1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.
4 Weight T ube Curl Pad Backrest Backrest Knob Wheel Leg Lever Seat Thank you for selecting the versatile WEIDER ® PRO XT20 weight bench. The PRO XT20 is designed to be used with your weight set (not included) to help you develop every major muscle group of the body .
5 10mm Spacer (20) M10 x 65mm Bolt (23) M8 Nylon Locknut (9) M8 x 58mm Bolt (16) M6 W asher (30) M10 x 180mm Bolt (22) M8 Flat W asher (13) M10 W asher (6) M10 x 22mm Bolt (7) M6 x 16mm Screw (3) M10 .
6 1. Press a 50mm Square Inner Cap (1) into the indi- cated end of the Front Leg (19). Insert a 50mm Thick Inner Cap (35) into the bottom of the Front Leg. Attach the Front Leg (19) to the Bench Frame (5) using two M10 x 65mm Bolts (23), two M10 W ashers (6), and two M10 Nylon Locknuts (1 1).
5. Lubricate an M10 x 180mm Bolt (22). Attach the Backrest Frame (27) to the Bench Frame (5) using the Bolt, two M10 W ashers (6), and an M10 Nylon Locknut (1 1). Slide the Backrest Bracket (34) into the indicated slot in the Bench Frame. Do not over- tighten the Nylon Locknut; the Backrest must be able to pivot freely .
8 7. Press three 45mm Square Inner Caps (17) into the Leg Lever (18). Press a 25mm Round Inner Cap (33) into the indicated end of the Weight T ube (21). Attach the Weight T ube (21) to the Leg Lever (18) with an M8 x 58mm Bolt (16), two M8 Flat W ashers (13), a 10mm Spacer (20), and an M8 Nylon Locknut (9).
9 This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 1 1 for impor- tant information on how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise.
10 ADJUSTING THE BACKREST The Backrest (15) can be adjusted to any of five posi- tions. T o adjust the Backrest, pull the Backrest Knob (29) outward and move the Backrest up or down. Slowly release the Backrest Knob, making sure the pin on the Backrest Knob is inserted through one of the holes in the Backrest Bracket (34).
11 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise.
12 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
13 MONDA Y Date: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
14 Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user ’s manual for information about ordering replacement parts.
26 32 3 14 29 6 22 11 36 10 12 25 12 11 23 6 39 12 25 12 17 18 17 9 13 21 33 17 12 25 12 20 1 13 16 10 35 11 3 3 6 2 11 24 2 8 10 5 11 10 28 30 4 27 30 4 7 34 11 28 15 19 31 11 37 38 11 37 38 40 41 41 42 15 EXPLODED DRA WING—Model No.
Part No. 176987 R0701B Printed in China © 2001 ICON Health & Fitness, Inc. FULL 90-DA Y W ARRANTY For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship.
An important point after buying a device Weider XT20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weider XT20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weider XT20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weider XT20 you will learn all the available features of the product, as well as information on its operation. The information that you get Weider XT20 will certainly help you make a decision on the purchase.
If you already are a holder of Weider XT20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weider XT20.
However, one of the most important roles played by the user manual is to help in solving problems with Weider XT20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weider XT20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
