Instruction/ maintenance manual of the product 831.150680 Weider
Go to page of 16
CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal (Under Seat) SEARS, ROEBUCK AND CO., HOFFMAN EST A TES, IL 60179 Model No. 831.150680 Serial No. Write the serial number in the space above for future reference.
W ARNING DECAL PLACEMENT 2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.
4 Backrest Weight Rests Upright Upright Knob Adjustment T ubes Storage Tu b e Leg Lever Weight T ube Curl Pad Thank you for selecting the WEIDER ® PRO 875 weight bench. The versatile WEIDER ® PRO 875 is designed to be used with your own weight set (not included) to develop every major muscle group of the body .
5 This chart is provided to help you identify the small parts used in assembly . The number in parenthesis below each part refers to the part number of the part, from the P ART LIST on page 14 of this manual. Important: Some parts may have been pre-assembled for shipping purposes.
6 1. Press two 30mm x 60mm Inner Caps (21) into the base on the Left Upright (4). Align one of the adjustment holes in the left Weight Rest (6) with the hole in the Left Upright (4). T ighten an Upright Knob (18) into the holes. Orient the Crossbar (3) and the Left Upright (4) so the decals are in the positions shown.
3 2 36 35 36 3 7 40 8 40 24 39 39 4 10 39 23 4. Press four 1” Square Inner Caps (23) into the ends of the Right and Left Backrest Frames (7, 8). Press two 1” x 2” Inner Caps (24) into the adjustment tubes on the Backrest Frames. Orient the Backrest (10) as shown.
8 2 11 Wide End 37 37 7 7. Orient the Seat (1 1) with the wide end on the side shown. Attach the Seat to the Frame (2) with four M6 x 16mm Screws (37). 9 22 42 43 22 15 27 28 43 44 30 22 36 Lubricate 45 1 6 6. Press three 45mm Square Inner Caps (22) into the Leg Lever (9).
8. Press two 3/4” Round Inner Caps (29) into each Pad T ube (19). Slide two Pad T ubes (19) through the Leg Lever (9). Slide the third Pad T ube through the holes in the Front Leg (1). Slide two Foam Pads (20) onto the ends of each Pad T ube (19). 9 20 20 19 19 20 29 29 29 1 8 13 9 9 9.
10 The weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 12 for important exercise information and refer to the accompanying exercise guide to see the correct form for several exercises.
11 4 6 18 ADJUSTING THE UPRIGHTS The Weight Rests (6) can be adjusted to six heights to accommodate different exercises. T o adjust the height, remove the Upright Knobs (18) from both Weight Rests and Uprights (4, 5 [not shown]). Slide the Weight Rests to the desired position and re-insert the Upright Knobs.
12 THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our muscles will continually adapt and grow as you pro- gressively increase the intensity of your exercise.
13 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout.
14 Key No. Qty . Description Key No. Qty . Description 1 1 Front Leg 2 1 Frame 3 1 Crossbar 4 1 Left Upright 5 1 Right Upright 6 2 Weight Rest 7 1 Right Backrest Frame 8 1 Left Backrest Frame 9 1 Leg .
13 37 12 36 35 14 35 3 14 35 36 5 36 35 18 31 32 38 38 6 6 4 35 18 32 31 38 38 36 33 34 10 23 23 7 40 39 39 40 40 24 8 39 11 25 26 2 36 36 37 46 36 36 36 41 17 1 22 36 45 47 16 29 19 20 29 44 43 22 22 9 22 27 28 15 42 30 43 29 19 20 29 20 20 19 29 29 20 20 14 36 37 21 21 21 21 22 22 48 15 EXPLODED DRA WING—Model No.
FULL 90 DA Y W ARRANTY Part No. 180660 R1 101A Printed in China © 2001 Sears, Roebuck and Co. The model number and serial number of your WEIDER ® PRO 875 are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
An important point after buying a device Weider 831.150680 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weider 831.150680 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weider 831.150680 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weider 831.150680 you will learn all the available features of the product, as well as information on its operation. The information that you get Weider 831.150680 will certainly help you make a decision on the purchase.
If you already are a holder of Weider 831.150680, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weider 831.150680.
However, one of the most important roles played by the user manual is to help in solving problems with Weider 831.150680. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weider 831.150680 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
