Instruction/ maintenance manual of the product DTV742 Wegener
Go to page of 11
800057-02 Rev. A Page 1 of 11 May 24, 2003 DTV742 Installation Quick Start Guide The Wegener Model DTV742 8VSB 4-Channel Multip lexor receives VHF/UHF broadcast HDTV signals and provides ou tput ASI streams for connection to ca ble system QAM m odulators.
800057-02 Rev. A Page 2 of 11 May 24, 2003 Basic System Setup Diagram Front-panel User Interface Note that from any screen, pressing the ESC ke y twice will return you to the Ho me Screen.
800057-02 Rev. A Page 3 of 11 May 24, 2003 Main-level Screens Second-level Screens 2 nd -level RF Input Where X is the RF port number. Press ENT to go to the third-lev el Input Setup Screens below and use the 5 or 6 keys to select <ON> or <OFF>, adding or removing thi s program t o/from the out put stream .
800057-02 Rev. A Page 4 of 11 May 24, 2003 Main-level Screens Second-level Screens 2 nd -level Program Status where X is the input port number. Press the ENT key to go to the third-level pro gram status screen. Press the 4 key to go to the next input (1 through 4).
800057-02 Rev. A Page 5 of 11 May 24, 2003 Main-level Screens Second-level Screens IP Address Selection Press the ENT key and then press the arrow keys to change the I P address. Press the ENT key to confirm the selection or ESC to cancel changes. Press the 4 key to go to the Netmask Selection.
800057-02 Rev. A Page 6 of 11 May 24, 2003 Using the Web Browser – Using the web browser of your choice, set the Address to http://nnn.nnn.nn n.nnn where nnn.nn n.nnn.nnn is the IP address of the unit to be controlled. Each unit on t he network m ust have a uni que address.
800057-02 Rev. A Page 7 of 11 May 24, 2003 The Stream Inform ation tab belo w shows inp ut and out put status. N o user input s are located on t his screen. The Unit Configuration tab below shows the current con figuration in us e and allows storage and loading of 10 se parate configurations .
800057-02 Rev. A Page 8 of 11 May 24, 2003 The Config In tab below provides the interface for sel ecting the RF Input and Program num bers th at will be used in all four of the DTV742’s multiplexors.
800057-02 Rev. A Page 9 of 11 May 24, 2003 The Config Out tab s ( Config Out 1 illustrated below) provide the interface for sel ecting program s for each of the ASI outputs.
800057-02 Rev. A Page 10 of 11 May 24, 2003 The Q&A/Help tab (s hown below) provides a nswers to com monly asked questions ab out the DTV7 44..
800057-02 Rev. A Page 11 of 11 May 24, 2003 Notices Environmental Operating Conditi ons & Physical Specifications Use Indoor Altitude Up to 2000 meters Temperature Range 10 o C to 40 o C Relative Humidity (max.) 80% for temperatures up to 31 o C decreasing linearly to 50% relative humidity as 40 o C.
An important point after buying a device Wegener DTV742 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wegener DTV742 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wegener DTV742 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wegener DTV742 you will learn all the available features of the product, as well as information on its operation. The information that you get Wegener DTV742 will certainly help you make a decision on the purchase.
If you already are a holder of Wegener DTV742, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wegener DTV742.
However, one of the most important roles played by the user manual is to help in solving problems with Wegener DTV742. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wegener DTV742 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
