Instruction/ maintenance manual of the product F6U600AU Belkin
Go to page of 11
F6U600au Line Interactive 600VA UPS Quick Install Guide.
2 Introduction Each year, several natural and man-made occurrences put the power supplied to your electronics in your home or office in jeopardy. At risk are your hardware, software, and data because of these power problems. This product is designed to provide clean power to all computer systems and peripherals with maximum protection.
3 3 - Charging This unit is shipped from the factory with its internal battery fully charged, however some charge may be lost during shipping and the battery should be recharged prior to use.
4 5 - Peripheral Equipment Connection Plug your peripheral equipment (printer, scanner or speakers) into the full-time surge protection outlet. This receptacle does not provide any power during a power failure. 6 - Modem/Phone line Connection Plug incoming phone line into the "IN" socket on the front of the UPS.
5 7 - Turn On/Off Press power switch to turn on the UPS. Press power switch again to turn off the UPS. 8 - DC Start Function DC Start Function enables UPS to be started up when AC utility power is not available and battery is fully charged.
Installing Belkin Automatic Power Management Software Step 1: PC Installation Mac Installation - Insert CD - Insert CD - After a short moment - Open “Belkin APMS” CD icon the CD will automatically.
Installing Belkin Automatic Power Management Software Step 2: To launch the software, PC - double click agent icon in your system tray to start the monitor Mac - click the agent icon in your dock and select “Start Monitor” Step 3: Select System Menu then “Auto Search UPS”, the software should now detect your connected UPS.
Important Safety Instructions Caution Please read the following information carefully and save this manual for future reference. Disregard of these safety notes may endanger life or health, as well as the function of the equipment and the safety of your data.
Specification 9 Model F6U600au Capacity VA/W 600VA/360W Input Voltage 220/230/240VAC Frequency 50/60Hz Phase Single Output (inverter Mode) Voltage Range 220/230/240VAC+10% Frequency 50Hz or 60Hz+1Hz W.
10 System Description Front 1 Power Switch 2 LCD indicators AC Mode: Green Lighting Battery Mode: Green Flashing Back 1 Battery Backup & Surge Outlets 2 Input & Fuse Inlet 3 Modem/Phone Line S.
11 Belkin Ltd. 4 Pioneer Avenue Tuggerah NSW 2259 Australia Tel: 02 4350 4600 Fax: 02 4350 4700 If the UPS failed to operate properly, please review the following points first. Symptom Possible Cause Remedy LED is flashing and audible alarm is heard intermittently.
An important point after buying a device Belkin F6U600AU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin F6U600AU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin F6U600AU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin F6U600AU you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin F6U600AU will certainly help you make a decision on the purchase.
If you already are a holder of Belkin F6U600AU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin F6U600AU.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin F6U600AU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin F6U600AU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
