Instruction/ maintenance manual of the product FLAME Weber
Go to page of 20
W ARNING If the information in this manual is not followed exactly , a fi re or explosion may result causing property damage, personal injury or loss of life. • Do not store or use gasoline or other fl ammable vapors and liquids in the vicinity of this or any other appliance.
2 DANGERS AND W ARNINGS DANGER Failure to follow the Dangers, W arnings and Cautions contained in this Owner ’ s Manual may result in serious bodily injury or death, or in a fi re or an explosion causing damage to property . W ARNINGS Do not use this appliance to cook food.
3 W ARRANTY / GENERAL INSTRUCTIONS Weber-Stephen Products Co. (W eber ® ) hereby warrants to the ORIGINAL PURCHASER of this Weber ® gas fi replace that it will be free of defects in material and workmanship from the date of purchase as follows: when assembled and operated in accordance with the printed instructions accompanying it.
4 CLEANING W ARNING: T urn your Weber ® gas fi replace OFF and wait for it to cool before cleaning. For availability of replacement parts contact the Customer Service Representative in your area using the contact information on our web site. Log onto www .
5 P ARTS LIST BASE - 1 BACK P ANEL - 1 RAIN SHIELD - 3 HOOD VENT SUPPORT - 4 SUPPORT BRACKET - 3 CERAMIC L OGS - 8 LA V A ROCKS HOOD VENT - 1 1/4 - 20 1/2” NUT - 16 1/4 - 20 1/2” CARRIA GE BOL T -.
6 EXPL ODED VIEW 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 26 27 12 19 22 23 24 25 18 28 29 20 21 30.
7 EXPL ODED VIEW LIST 1. HOOD VENT 2. 1/4 - 20 X 1/2” C ARRIAGE BOL T 3. SUPPORT BRACKET 4. QUICK -DISCONNEC T HOSE 5. 1/4 - 20 X 1/2” NUT 6. HOOD VENT SUPPORT 7. RAIN SHIELD 8. REAR P ANEL 9. W ASHER 10. 1/4 - 20 X 1/2” KEPS NUT 11. GAS TRAIN ASSEMBL Y 12.
8 1 2 3 4 ASSEMBL Y 4 ( ) 2 ( ) Hand tighten only . Hand tighten only . 2 ( ) Hand tighten only . Assembly: Consumer - 40 Minutes. * Professional - 30 Minutes.
9 ASSEMBL Y 6 5 4 ( ) Hand tighten only . W arning text on panel faces outward..
10 ASSEMBL Y 8 1 2 10 Do not obstruct ignition box. 9 Empty lava rocks onto cardboard packing. Remove small debris. Do not empty bag of lava rocks directly into the fi replace. Doing so could cause the burner ports to clog. 7 4 ( ) Wrench tighten ALL nuts at this time.
11 11 ASSEMBL Y DANGER Do not operate fi replace untill ALL rain shields have been removed. Failure to do so could result in a fi re or explosion which can cause serious bodily injury or death, and damage to property . 13 12 Always attach rain shields when not in use and for storage.
12 GAS INSTRUC TIONS Gas supply Shut off Locking shut off Inside wall Outside wall Quick disconnect 3 / 8 " Pipe nipple 1 / 2 " Pipe nipple Do Not Use This is a typical installation of a Weber ® natural gas fireplace. Local codes may require different installations.
13 CHECK THA T THE BURNER V AL VE IS OFF V alve is shipped in the OFF position, but you should check to be sure that it is turned OFF . Check by pushing down and turning clockwise. If it does not turn, it is off. Proceed to the next step. If it does turn continue turning it clockwise until it stops, then it is off.
14 GAS INSTRUC TIONS CHECK F OR GAS LEAKS (1) (5) (2) (3) (4) DANGER Do not use an open fl ame to check for gas leaks. Be sure there are no sparks or open fl ames in the area while you check for leaks. Sparks or open fl ames will result in a fi re or explosion which can cause serious bodily injury or death and damage to property .
15 GAS INSTRUC TIONS Check: 1) Bulkhead fi tting-to-Regulator connection. W ARNING: If there is a leak at connections (1), turn OFF the gas. DO NOT OPERA TE THE FIREPLACE. Contact the Customer Service Representative in your area using the contact information on our web site.
16 OPERA TING INSTRUC TIONS LIGHTING Summary lighting instructions are on the control panel. 1. 2. 4. 5. 6. 3. W ARNING: Check hose before each use of fi replace for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way , do not use the fi replace.
17 OPERA TING INSTRUC TIONS 1) Remove rain shields. 1. 2. 5. 4. 6. 3. MANU AL LIGHTING DANGER Failure to remove rain shields while igniting the fi replace’ s burners, or not waiting 5 minutes to allow the gas to clear if the fi replace does not light, may result in an explosive fl ame-up which can cause serious bodily injury or death.
18 TROUBLESHOO TING PROBLEM CHECK CURE Burner burns with a dark orange fl ame, in conjunction with heavy soot- ing. Inspect Spider / Insect Screen for pos- sible obstructions. (Blockage of holes.) Clean Spider / Insect Screen. (See Section “Annual Maintenance”) Burner does not light, or fl ame is low in HIGH position.
19 MAINTENANCE WEBER ® SPIDER / INSEC T SCREEN Y our Weber ® gas fi replace, as well as any outdoor gas appliance, is a target for spiders and other insects. They can nest in the venturi section (1) of the burner tube. This blocks the normal gas fl ow , and can cause the gas to fl ow back out of the air shutter .
20 MAINTENANCE MAIN BURNER FLAME P A TTERN The Weber ® gas fi replace burner has been factory set for the correct air and gas mixture. A correct fl ame pattern is: • A yellow to light-orange fl .
An important point after buying a device Weber FLAME (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weber FLAME yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weber FLAME - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weber FLAME you will learn all the available features of the product, as well as information on its operation. The information that you get Weber FLAME will certainly help you make a decision on the purchase.
If you already are a holder of Weber FLAME, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weber FLAME.
However, one of the most important roles played by the user manual is to help in solving problems with Weber FLAME. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weber FLAME along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
