Instruction/ maintenance manual of the product 9400 Wayne-Dalton
Go to page of 8
IMPORT ANT NOTICE! The Quick Start Guide is only meant to be used as an aid and/or introduction to garage door installation, and does not replace the complete Installation Instructions and Owner’ s manual available on the W ayne-Dalton website.
PRE - INST ALLA TION Important Safety Instructions Definition of key words used in this manual: W ARNING W ARNING INDICA TES A POTENTIALL Y HAZARDOUS SITUA TION WHICH; IF NOT AVOIDED , COULD RESUL T IN SEVERE OR FA T AL INJURY . CAUTION: PROPER TY DAMAGE OR INJURY CAN RESUL T FROM FAILURE TO FOLLOW INSTRUCTIONS.
JAMB BRACKET SCHEDULE DOOR HEIGHT TRACK LENGTH 1ST SET 2ND SET 3RD SET 6’0” 64” (1626 mm) 5 M 6 B NA 6’5” 69” (1753 mm) 3 B 6 M NA 6’8” 72” (1829 mm) 3 B 6 M NA 7’0” 76” (1930 .
Attaching Hor T racks to Q.I. Flag Angles T ools: Ratchet wrench, 9/16” Socket, 9/16” Wrench, level, Step ladder 14 NOTE: If you have Q.I. flag angles, complete this step. T o install horizontal track, place the curved end over the top roller of the top section.
W ARNING W ARNING F AILURE TO PLACE VICE CLAMPS ONTO VERTIC AL TRACK CAN ALLOW DOOR TO RAISE AND CAUSE SEVERE OR F A T AL INJURY . Winding Springs T ools: Step Ladder , Approved winding bars, 3/8” W.
exposure to sunlight. Cleaning the door will generally restore the appearance of the finish. T o maintain an aesthetically pleasing finish of the garage door , a periodic washing of the garage door is recommended. THE FOLLOWING CLEANING SOLUTION IS RECOMMENDED: A mild detergent solution consisting of one cup detergent (with less than 0.
W ARRANTY Lifetime limited warranty Models 9100, 9400, 9600 Subject to the terms and conditions contained in this Lifetime Limited Warranty , Wayne-Dalton Corp.
AFTER INST ALLA TION IS COMPLETE, F ASTEN THIS MANUAL NEAR THE GARAGE DOOR. Please Do Not Return This Product T o The Store Thank you for your pur chase. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages business listings or go to the Find a Dealer section online at www .
An important point after buying a device Wayne-Dalton 9400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 9400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 9400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 9400 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 9400 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 9400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 9400.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 9400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 9400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
