Instruction/ maintenance manual of the product 9100 Wayne-Dalton
Go to page of 10
IMPORT ANT NOTICE! The Quick Start Guide is only meant to be used as an aid and/or introduction to garage door installation, and does not replace the complete Installation Instructions and Owner’ s manual available on the W ayne-Dalton website.
PRE - INST ALLA TION Important Safety Instructions Definition of key words used in this manual: W ARNING W ARNING INDICA TES A POTENTIALL Y HAZARDOUS SITUA TION WHICH; IF NOT AVOIDED , COULD RESUL T IN SEVERE OR FA T AL INJURY . CAUTION: PROPER TY DAMAGE OR INJURY CAN RESUL T FROM FAILURE TO FOLLOW INSTRUCTIONS.
Measure the length of the vertical tracks. Using the jamb bracket schedule, determine the place- ment of the jamb brackets for your door height and track length.
NOTE: When attaching operator bracket to top section with u-bar , apply additional pressure to thread into the u-bar . (2) #12 x 1/2” Phillips head screws (5) 1/4”- 14 x 5/8” Self-tapping screws T op Section T ools: Hammer , Step ladder , T ape measure 14 Place the top section in the opening.
End Brackets T ools: Power drill, 7/16” Socket driver , 1/2” Wrench, Step ladder 21 IMPORT ANT : WARNING T AGS MUST BE SECUREL Y A TT ACHED TO BOTH END BRACKETS. End brackets are right and left hand. Y ou can identify the right hand end bracket by the discon- nect cable guide hole in the top of the bracket.
black tooth on the ratchet wheel or the mark on the winding shaft. Rotate the winding shaft to the required number of turns for your door . Then return to the right hand side and wind the right hand spring to the required number of turns. Place pawl knob in lower position on both sides.
Horizontal tracks Door edges 3/4” To 7/8” 3/4” To 7/8” Balancing Door T ools: Ratchet wrench, Socket: 5/8”, 3” Socket extension, Wrench: 5/8”, (2) Vice clamps, T ape measure, Level, Step Ladder 28 NOTE: Windows will cause the top section to be significantly heavier than the remaining sec- tions.
water . A final wipe and rinse should be done with clean water only to remove any loose particles and any soapy film residue. Surface scratches, which have not exposed the metal substrate, can be lightly buffed or sanded with 0000 steel wool or no. 400 sand paper to create a smoother surface.
age, improper installation, or any alteration of the door or its components, abuse, damage from corrosive fumes or substances, salt spray or saltwater air , fire, Acts of God, failure to properly maintain the door , or attempt to use the door , its components or related products for other than its intended purpose and its customary usage.
AFTER INST ALLA TION IS COMPLETE, F ASTEN THIS MANUAL NEAR THE GARAGE DOOR. Please Do Not Return This Product T o The Store Thank you for your pur chase. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages business listings or go to the Find a Dealer section online at www .
An important point after buying a device Wayne-Dalton 9100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 9100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 9100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 9100 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 9100 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 9100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 9100.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 9100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 9100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
