Instruction/ maintenance manual of the product 5500 Wayne-Dalton
Go to page of 2
DOOR-WIDTH PLUS 3-3/8” (86 mm) TO 3-1/2” (89 mm) Position a ladder slightly to the side of spring so that the winding cone is easily accessible, yet your body is not in di- rect line with the winding bars. Check the label attached to the spring warning tag for the required number of complete turns to balance your door .
AL TERNA TE INST ALLA TIONS (1) Socket Wrench with 7/16”, 1/2”, 9/16”, 5/8” sockets Safety Glasses (1) 7/16” Wrench (2) Locking Pliers (1) Screw Driver (Phillips Blade) (2 or 3) Saw Horses or other supports for placing sections on while assembling W ayne-Dalton Corp.
An important point after buying a device Wayne-Dalton 5500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 5500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 5500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 5500 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 5500 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 5500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 5500.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 5500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 5500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
