Instruction/ maintenance manual of the product 5155 Wayne-Dalton
Go to page of 8
® IMPORT ANT SAFETY NOTICES This manual MUST be attached to the w all in close proximity to the door . © Copyright 2001 W ayne-Dalton Corporation MAINTENANCE AND FINISHING INSTRUCTIONS MAINTENANCE W.
HEADRO OM A B SIDE R OOM D AYLIGHT OPENING HEIGHT BACKR OOM D AYLIGHT OPENING WIDTH SIDE R OOM OPERATING ZONE Y ou Can Sav e Time And Effor t If Y ou First Establish All T he F acts About The Operating Zone HEADR OOM CHART F or Standard Lift T rack (Minimum Distance Required) Dim.
PG. 14 DIM Y HEADER TO SHAFT CENTERLINE MINIMUM HEADR OOM REQUIRED (REFER TO HEADR OOM CHART) 8 for 2 TRAC K 12 for 3 TRAC K EXTEND J AMBS TO OPENING HEIGHT plus DIM Y plus 1 1/2 (MINIM.
Inter mediate hanger s for all door s ov er 11 high and over 14 wide. Positioned half way between jamb and rear hanger. Lateral brace all hanger angles. Use a 3/8 X 3/4 tr uss bolt for r oller clearence. 3/8 dia. Bolt should protr ude into track to ser ve as a roller stop.
PG. 5 STEP 4. MODEL 5150 & 5200 U-bars & str uts to be secured to the section using (2) 1/4 - 20 x 7/8 TEK screws at each end. Additional 1/4 - 20 x 7/8 TEK screws will need to be used at each hinge location. U-bar s and struts ar e to be mounted at the top of section under hinges and across top brackets, as seen in Fig .
PG. 6 STEP 10: Position shaft(s) with spring system components to proper elev ation, level and secure each end bracket to the horiz on tal reinforcing angle using (2) 3/8 x 3/4 tr uss bolts and nuts.
5/16 X 1 Self drilling & tapping screw for use on steel jambs. 3/8 X 3 Sleeve anchor for use on pre-cast concrete. ( Drill a 3/8 x 3-1/2 deep hole) 5/16 X 1 5/8 Lag screw for use on wood jambs.
BLACK RED BLACK (3) 3/8 x 3/4 tr uss bolts and nuts. (2) for securing end bracket (1) for securing horizontal angle 1/4 x 9/16 track bolt and nut. RIGHT SIDE ILLUSTRATES DOUBLE ENDCAPS AND HARDWARE LEFT SIDE ILLUSTRATES SINGLE ENDCAPS AND HARDWARE Extra 3/8 tr uss bolt and nut PG .
An important point after buying a device Wayne-Dalton 5155 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 5155 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 5155 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 5155 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 5155 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 5155, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 5155.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 5155. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 5155 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
