Instruction/ maintenance manual of the product 3014 Wayne-Dalton
Go to page of 7
W ayne-Dalton Corp. P .O. Box 67 Mt. Hope, OH 44660 (888) 827-3667 www .wayne-dalton.com Opener Models: T orsion i drive™ models: 3651-372, 3750-372. Quantum™/Classicdrive™ models: 3012, 3014, 3016, 3018, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414, 3512, 3514.
T able of Content s Important Safety Instructions For Inst allation And Use 2. Bracket Installation 3. Wiring Installation “Quantum™/Classicdrive™” 4. Wiring Installation “DoorMaster™” 4. Wiring Installation “ i drive™” 5. Wiring Installation “T orsion idrive™” 5.
W ARNING DISCONNECT ALL POWER T O GARAGE DOOR OPENER BEFORE SER VICING OR INST ALLING ACCESSORIES OR PHOTOELECTRIC SAFETY SENSORS. FOR ALL OPENERS, UNPLUG 120 V AC POWER CORD FROM RECEPT ACLE. FOR DOORMASTER, ALSO UNPLUG TELEPHONE CORD TYPE COMMUNICA TIONS CABLE.
NOTE: If wires must be lengthened or spliced into prewired installation, use wire nuts or a suitable connector . Pay attention to polarity . DoorMaster™ 4 Quantum™/Classicdrive™ FIG . 2 Wire Routing FIG . 1 Wire Routing Quantum™/Classicdrive™ models: 3012, 3014, 3016, 3018, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414, 3512, 3514.
i drive™ models: 3660-372, 3661-372, 3662-372, 3760-372, 3751-372. Uncoil wires from photoelectric sensors and route wires up garage wall and along door header towards the right side of the opener (see Fig. 3 ). Route wires behind torque tube and tack wires in place with insulated staples (not supplied).
IMPOR T ANT! - This infrared safety sensor sends an invisible beam of light from the sending unit to the receiving unit across the door opening. The door opener will not operate until the safety sensor is connected to the power unit and properly aligned.
The Manufacturer warrants that the PHOTOELECTRIC SAFETY SENSORS will be free from defects in materials and workmanship including electronic components for a period of 90-DA YS from the date of installation, provided it is properly installed, maintained and cared for under specified use and service.
An important point after buying a device Wayne-Dalton 3014 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wayne-Dalton 3014 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wayne-Dalton 3014 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wayne-Dalton 3014 you will learn all the available features of the product, as well as information on its operation. The information that you get Wayne-Dalton 3014 will certainly help you make a decision on the purchase.
If you already are a holder of Wayne-Dalton 3014, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wayne-Dalton 3014.
However, one of the most important roles played by the user manual is to help in solving problems with Wayne-Dalton 3014. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wayne-Dalton 3014 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
