Instruction/ maintenance manual of the product Gas Hob Waterford Precision Cycles
Go to page of 11
90cm GAS HOB 90cm GAS HOB OPERA OPERA TING & INST TING & INST ALLA ALLA TION MANUAL TION MANUAL Please read these instructions carefully before use Please read these instructions carefully before use .
Page No. 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION Dear Customer , Thank you for buying a W aterford Appliance. The quality of W aterford’s appliances is exceptional and immediately visible.
Note: Before using the gas hob for the first time, read the operating manual carefully so that you can ensure safe operation and avoid damage to the hob. * The hob should only be used when it has been fully installed as outlined in the Inst allation Section.
PRODUCT FEA TURES CONTROL P ANELS 90cm Built-In Gas Hob with front commands 1. Auxiliary Burner (A) 2. Semi-Rapid back burner (SR) 3. Rapid Burner (R) 4.
INST ALLA TION INSTRUCTIONS The appliance must be installed in accordance with the regulations in force. All installation and adjust- ment operations must be carried out by a suitable qualified person. The manufacturer declines all liability for any direct or indirect damage if these regulations are not com- plied with.
GAS CONNECTION Fig.8 Note: This hob is configured for Natural Gas as standard. It is the inst allers responsibility to make the necessary modifications (as out- lined in the section “converting for LPG use”) to ensure the appliance is correctly configured for use with LPG .
When fitting an extraction hood over the appliance ensure that there is a permanent air vent to the room that allows adequate ventilation for both the hob and the hood. If the extraction hood is installed above the hob, a minimum distance of 750mm must be maint ained between the top surface of the appliance and the bottom surface of the hood.
This optional support was designed for concave base pans and are ideal for woks. See Fig 14. WOK SUPPORT 8 Fig 14 In order to maintain the appearance of this hob, periodical cleaning is recommended. Wipe away any spills when they occur in order to prevent burned on deposits which can be dif ficult to remove.
TROUBLE SHOOTING The following are a list of minor faults (with instructions on how to rectify them) that should be used by the operator in the event of the appliance not working prior to contacting a Service Engineer .
We undert ake to repair or replace, free of charge to you any part found to be faulty within the 2 year period from the date of purchase provided that:- * The fault is, in our opinion, caused by defective workmanship, or material and not by accident, misuse, neglect or normal wear and tear .
An important point after buying a device Waterford Precision Cycles Gas Hob (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Waterford Precision Cycles Gas Hob yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Waterford Precision Cycles Gas Hob - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Waterford Precision Cycles Gas Hob you will learn all the available features of the product, as well as information on its operation. The information that you get Waterford Precision Cycles Gas Hob will certainly help you make a decision on the purchase.
If you already are a holder of Waterford Precision Cycles Gas Hob, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Waterford Precision Cycles Gas Hob.
However, one of the most important roles played by the user manual is to help in solving problems with Waterford Precision Cycles Gas Hob. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Waterford Precision Cycles Gas Hob along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
