Instruction/ maintenance manual of the product XTM 5 Series WatchGuard Technologies
Go to page of 21
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 1 of 21 Authorization and Revision History for this document is available in the WatchGuard EC.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 2 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 1.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 3 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.0 Instruction 3.1 -Remove labels Material removed (part Desc or P/N & material type) Instruction visual Labels Cert.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 4 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.2 –Remove back screws holding chassis top to chassis bottom and remove top cover.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 5 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.3 –Depress memory tabs and remove memory.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 6 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.4 – Unplug power supply cables from motherboard, cut all cable ties, remove power supply screws, and remove power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 7 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.5 – Remove screws from the power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 8 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.6 –Remove the top from the power s upply, remove the cable tie and screw inside the power supply, and remo ve fan from the power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 9 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.7 – Remove labeling from the top lid and the botto m of the power supply.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 10 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.8 – Disengage heatsink clamps and remo ve heatsink from motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 11 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.9 – Pull back clamp and remove battery.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.10 – Remove fan screws from back of chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 13 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.12 – Cut cable ties for fans, unplug f ans from motherboard, and remove fans.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 14 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.13 – Unscrew screws from heatsink and remove heatsink from motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 15 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.14 – Unlatch CPU from mo therboard and remove CPU.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 16 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.15 – Unplug LCD cable from LCD circ uit board and motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 17 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.16 – Cut cable tie attaching po wer switch cable to chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 18 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.18 – Remove screws attaching the moth erboard to the chassis and the Cavium card to the chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 19 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.19 – Unplug the Ethernet ports on t he motherboard from the chassis and unplug the Cavium card from the mot herboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 20 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.21 – Use a flat-head screwdriver to disengage the power switch assembly from the chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.22 – Push tabs on the inside of the bez el to disengage from the chassis.
An important point after buying a device WatchGuard Technologies XTM 5 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought WatchGuard Technologies XTM 5 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data WatchGuard Technologies XTM 5 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, WatchGuard Technologies XTM 5 Series you will learn all the available features of the product, as well as information on its operation. The information that you get WatchGuard Technologies XTM 5 Series will certainly help you make a decision on the purchase.
If you already are a holder of WatchGuard Technologies XTM 5 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime WatchGuard Technologies XTM 5 Series.
However, one of the most important roles played by the user manual is to help in solving problems with WatchGuard Technologies XTM 5 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device WatchGuard Technologies XTM 5 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
