Instruction/ maintenance manual of the product Profet 3.3 / 5.2 Warwick
Go to page of 12
OFFICIAL W ARWICK AMP OWNER MANUAL.
.
ENGLISH 5.
ENGLISH 6 SAFETY HINTS - Read these instructions - Keep these instructions - Heed all warnings - Follow these instructions Caution: T o reduce the risk of electric shock, do not open the amplifier’ s case. Avoid exposure to rain or moisture. No user serviceable parts insi- de, refer all service to a qualified technician.
ENGLISH 7 RECOMMENDA TIONS The following recommendations are designed to ensure that the device always functions reliably: • Never open the casing! T o do so would expose you to the risk of an electric shock. Should repairs prove necessar y , leave them to qualified service personnel.
ENGLSIH 8 GETTING ST AR TED 1. Make sure that loudspeakers capable of sustaining the load of a bass signal are connected to the SPEAKER OUT sockets (the speaker cables should meet a cross-section of at least 2 x 1.
PROFET 5.1 9 FRONT P ANEL CONTROLS INPUT Socket to plug in a bass guitar . GAIN Control + CLIP LED to adjust the input level. COMPRESSOR Switch to activate the compressor control to adjust the level of compression.
10 PROFET 3.2 FRONT P ANEL CONTROLS INPUT Socket to plug in a bass guitar . GAIN Control + CLIP LED to adjust the input level. COMPRESSOR Switch to activate the compressor control to adjust the level of compression.
TECHNICAL DA T A - PROFET 3.2 / 5.1 Input 25 mV Preamp transistor , active controlled Poweramp fan cooled (non permanent) Equalizer Bass ±12dB @ 80Hz Low Mid ±12dB @ 200Hz Hi Mid ±12dB @ 600Hz T re.
DIAGRAM - PROFET 3.2 / 5.1 CONNECT SPEAKERS - PROFET 3.2 / 5.1 Speaker Set-up Quantity Impendance 4 16 ohms Cabinets 2 8 ohms Cabinets 1 6 ohms Cabinet 1 4 ohms Cabinet Note: The minimum load of the power amplifier is 4 ohms.
67.
Please see the new Warwick Bass Forum on www .war wick.de For support information please refer to support@warwick.de Visite por favor el nuevo forum Warwick de bajo en www .war wick.de Para soporte técnico e información, dirigirse por favor a support@warwick.
An important point after buying a device Warwick Profet 3.3 / 5.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Warwick Profet 3.3 / 5.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Warwick Profet 3.3 / 5.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Warwick Profet 3.3 / 5.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Warwick Profet 3.3 / 5.2 will certainly help you make a decision on the purchase.
If you already are a holder of Warwick Profet 3.3 / 5.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Warwick Profet 3.3 / 5.2.
However, one of the most important roles played by the user manual is to help in solving problems with Warwick Profet 3.3 / 5.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Warwick Profet 3.3 / 5.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
