Instruction/ maintenance manual of the product WQ42BC1BL Walker
Go to page of 12
For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www .
Gener al Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly . II. Follow each step carefully to ensure the proper assembly of this product. III. T wo people are recommended for ease in the assembly of this product.
Parts List.
Hardware List W ood dowel Cam bolt Cam lock Round-headed screw Large screw Door stopper Medium screw Large bolt Small screw Handle Small bolt Door stopper plate Door hinge Plastic wedge Shelf support .
Insert dowels (A) into slats (13,14,15). Screw cam bolts (B) into top panel (1) and slat (13). Attach door stopper (D) to top panel (1) using round-headed screws (E). Attach slats (14,15) to slat (13) using cam bolts as guides. Insert cam locks (C) into slats (14,15) and tighten with a screwdriver .
Screw cam bolts (B), and insert dowels (A) into panel (4). Attach panel (10) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C) into panel (10) and tighten with a screwdriver . Screw cam bolts (B), and insert dowels (A) into panel (3).
Attach bottom panel (2) to the panel assemblies from Steps 3 and 4, and to panels (6,9) using large bolts (F) and wrench (Q). Note that panels (6,9) will not be directly attached to the panel assemblies from Steps 3 and 4.
Slide back panel (18), back slat (17) then back panel (16) into the stand assembly . Insert dowels (A) into the stand assembly ..
Insert cam locks (C) into the stand assembly . Attach top panel (1) to the stand assembly using cam bolts and dowels as guides. T ighten cam locks (C) with a screwdriver to secure top panel (1). Attach door hinges (I) to doors (1 1,12) using medium screws (J).
Attach doors (1 1,12) to the stand assembly at hinges (I) using medium screws (J). For proper alignment of doors, it may be necessary to loosen small screws (J), adjust the placement of hinges (I) and re-tighten screws (J). Insert shelf support pins (M) into the stand at desired shelf heights.
Insert shelf support pins (M) into the stand at desired shelf heights. Carefully place shelves (8) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8). Insert shelf support pins (M) into the stand at desired shelf heights.
Secure back panels (16,18) using plastic wedges (N) and large screws (P)..
An important point after buying a device Walker WQ42BC1BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Walker WQ42BC1BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Walker WQ42BC1BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Walker WQ42BC1BL you will learn all the available features of the product, as well as information on its operation. The information that you get Walker WQ42BC1BL will certainly help you make a decision on the purchase.
If you already are a holder of Walker WQ42BC1BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Walker WQ42BC1BL.
However, one of the most important roles played by the user manual is to help in solving problems with Walker WQ42BC1BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Walker WQ42BC1BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
