Instruction/ maintenance manual of the product W60C73MB-MT Walker
Go to page of 19
Item #: W60C73-MT Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www .
Gener al Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly . II. Follow each step carefully to ensure the proper assembly of this product. III. T wo people are recommended for ease in the assembly of this product.
Parts List.
Hardware List Cam lock Cam bolt Wood dowel Glue tube Bolt Wrench Door stopper Small round head screw Shelf support pin Door stopper plate Small screw Door hinge Large screw Handle Large round head scr.
TV Mounting Hardware List TV Mounting Parts List P .5 Adjustment knob Bolt W asher Wrench.
Screw cam bolts (B) into stand top (1). Attach door stoppers (G) to stand top (1) using small round head screws (H). Screw cam bolts (B) into panels (3,4,5,6). Note that a cam bolt will be screwed into each side of panels (5,6). Insert dowels (C) into panels (3,4,5,6), slat (7) and shelves (9).
Insert dowels (C) into shelves (13) and panels (14,15,17,18). Screw cam bolts (B) into panels (14,15,17,18). Screw cam bolts (B) into doors (16,19). Attach door stopper plates (J) to doors (16,19) using small screws (K). Attach handles (N) to doors (16,19) using large round head screws (P).
Attach panels (14,15) to shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves (13) and tighten with a screwdriver . Note that two cam locks will be inserted into each shelf. Insert dowels (C) into feet (20) and back panel (10).
Attach panels (17,18) to the second set of shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves (13) and tighten with a screwdriver . Note that two cam locks will be inserted into each shelf. Attach the shelf assembly from the previous step to door (19) using cam bolts and dowels as guides.
Insert cam locks (A) into slat (7). Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. T ighten cam locks (A) with a screwdriver . Attach the shelf assembly from Step 6 to door (16) using cam bolts and dowels as guides. Insert cam locks (A) into panels (14,15) and tighten with a screwdriver .
Attach shelf (9) to panel (6), then panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks (A) into shelf (9) and tighten with a screwdriver . Attach shelf (9) to panel (5), then panel (3) to shelf (9) using cam bolts and dowels as guides.
Carefully slide back panel (10) into place along the back of the stand assembly . Use cam bolts and dowels as guides. Insert cam locks (A) into back panel (10) and tighten with a screwdriver . Attach the panel assembly from the previous step to stand top (1) using cam bolts and dowels as guides.
Attach stand supports (21) to stand base (2) using bolts (E). T ighten bolts (E) with wrench (F). Carefully slide back panels (1 1) into place along the grooves at the back of the stand assembly .
Attach feet (20) to stand base (2) using dowels as guides. Attach stand base (2) to the stand assembly using bolts (E). T ighten bolts (E) with wrench (F).
Attach door assembly (14,15) to the stand assembly at door hinges (L) using large screws (M). Attach door hinges (L) to the door assemblies from Steps 8 and 9 using large screws (M).
Insert shelf support pins (I) into the stand assembly at desired shelf heights. Carefully slide shelves (8) into place resting on shelf support pins (I). Attach door assembly (17,18) to the opposite side of the stand assembly at door hinges (L) using large screws (M).
Completed stand assembly . The following steps show the assembly and attachment of the TV mount. Secure back panels (1 1) using plastic wedges (R) and medium screws (Q).
Slide mounting bars (c) onto lateral support bar (b). Secure mounting bars (c) by screwing adjustment knobs (g) into place. Attach lateral support bar (b) to upright support bar (a) using bolts (e) and washers (f). Attach support brackets (d) to upright support bar (a) using bolts (e) and washers (f).
Attach TV mount to stand assembly using bolts (e) and washers (f). T ighten bolts (e) with wrench (h)..
An important point after buying a device Walker W60C73MB-MT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Walker W60C73MB-MT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Walker W60C73MB-MT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Walker W60C73MB-MT you will learn all the available features of the product, as well as information on its operation. The information that you get Walker W60C73MB-MT will certainly help you make a decision on the purchase.
If you already are a holder of Walker W60C73MB-MT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Walker W60C73MB-MT.
However, one of the most important roles played by the user manual is to help in solving problems with Walker W60C73MB-MT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Walker W60C73MB-MT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
