Instruction/ maintenance manual of the product V233H Acer
Go to page of 26
Acer LCD Monitor User's Guide.
Changes may be made peri odically to the infor mation in this publication without obligation to notify any person o f such revisions o r change s. Such chang es will be incorpo rated in new editions of this manual or supplementary documents and publ ications.
iii Special notes on LCD monitors The following are normal with the LCD monitor and do not indi cate a prob lem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then tu rn it on again to make sure the flicker disappears.
iv Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment ope rator as possible. When you need to disconnec t power from the equipm ent, be sure to unplug the power cord from the electrical outlet.
v ampere rating of the equipment plugge d into the extension cord does not exceed the extension cord ampere rating. Also, make sure that th e total rating of all products plugg ed into the wall outlet d oes not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in too many devices.
vi Note: Adjust only those controls that are covered by the operating instructions, since improper adju stment of other controls may result in damage and will often requ ire extensive work by a qualified technician to restore the pro duct to normal cond ition.
vii Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize po llution and ensure utmo st protection of the global envi ronment, please recycle. For more informatio n on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://global.
viii refers to http://www.energystar.gov and http://www.energystar.g ov/ powermanagement . As an ENERGY STAR partner, Acer Inc. has de termined that this product mee ts the ENERGY STAR guidelines for energy efficiency. Note: The statement above is applic able only to Acer LCD mon itor with an ENERGY STAR logo.
ix Taking care of your vision Long viewing hour s, wearing incorrect glasses or contact lenses, gla re, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The follo wing sections provide su ggestions on how to reduce eyestrain.
x We , Acer Computer (S hanghai) Limited 3F, No. 168 Xizang medium road, Huangpu District, Shanghai, China Contact Person: Mr. Easy Lai Tel: 886-2-8691-3089 Fax: 886-2-8691-3000 E-mail: easy_lai@acer.
xi Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may n ot cause harmful interference, and (2) This device must ac cept any interference received, includin g interference that may cause undesired operation.
1 Special notes on LCD monitors iii Information for your safety and comfort iii Safety instructions iii Cleaning yo ur monitor iii Connecting /disconnec ting the device iii Accessibility iv Safe liste.
1 English Unpacking Please check that the following items are present when yo u unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future.
2 English Attaching/removing the base Screen position adjustment Attaching: Align the release button on the bottom of the mo nitor with the corresponding slots on the bottom of the base. Removing: Press the release button as indicated, then pull in the direction of the arrow to remove the base.
3 English Connecting th e power cord • Check first to make sure that the pow er cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
4 English Connector pin assignment 15-pin color display signal cable PIN No. Description PIN No. Description 1 Red 9 +5 V 2 Green 10 Logic ground 3 Blue 11 Moni tor ground 4 Monitor ground 12 DDC-seri.
5 English 24-pin color display signal cable PIN No. Description PIN No. Description 1 TMDS data 2- 13 NC 2 TMDS data 2+ 14 +5 V power 3 TMDS data 2/4 shield 15 GND (return for +5 V hsync.
6 English Mode Resolution Standard timing table 1 Dos 720 x 4 0 0 7 0 Hz 2 VGA 6 4 0 x 480 60 Hz 3 V G A 6 4 0 x 480 67 H z 4 SVGA 800 x 6 00 56 Hz 5 S VG A 800 x 600 60 Hz 6 XGA 1024 x 768 60 Hz 7 XG.
7 English Installation To install the monitor on your host system, please follow the steps below: Steps 1 Connect t he video c able a Make sure both the monitor and comp uter are switched off. b Connect th e VGA video c able to the c omputer . c Connect the digital cabl e (only for dua l-input mode ls).
8 English User controls Front panel controls 1 Power LED : Lights u p to in dicate the power is turned o n. 2 Power Switch : Turn the p ower on or off . 3.4 < / > : Press < or > to navig ate to t he desired fun ction, pres s Enter to select the fun ction.
9 English How to adjust a setting 1 Press the Menu button to activate the OSD window. 2 Press < or > to select the desired function. 3 Press the Menu button again to select the function that you want to adjust. 4 Press < or > to change the settings of the current function.
10 English Acer eColor Management • Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. 2 Press "<" or ">" to select the mode. 3 Press the Auto-adjust button to confirm the mode and run A uto Adjust.
11 English User Main menu icon Sub menu icon Sub menu item Description Contrast Adjusts the contrast between the foreground and background of the screen image. Brightness Adjusts the background brightness of the screen image. ACM ACM (Adaptive Contrast Manageme nt) ACM On/Off switch, default Off .
12 English N/A English L anguage selection. N/A 繁體中文 Deutsch Français Español Italiano 简体中文 日本語 Suomi EMEA version OSD only. Nederlands Русский H. Position Adjusts the horizontal position of the OSD. V. Position Adjusts the vertical position of the OSD.
13 English Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if y ou can self-diagnose the problem. VGA mode Problem LED status Remedy No picture visible Blue Usin g the OSD, adjust brightness and contrast to maximum or reset to their default settings.
14 English DVI mode Proble m LED status Remedy No picture visible Blue Using th e OSD, adjust brightness and contra st to max imum or reset to their default settings. Off Check the power switch. Check if the AC power cord is properly connected to the monitor.
An important point after buying a device Acer V233H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer V233H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer V233H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer V233H you will learn all the available features of the product, as well as information on its operation. The information that you get Acer V233H will certainly help you make a decision on the purchase.
If you already are a holder of Acer V233H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer V233H.
However, one of the most important roles played by the user manual is to help in solving problems with Acer V233H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer V233H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
