Instruction/ maintenance manual of the product W44COSBL Walker
Go to page of 14
Item #: W44COS Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www .
Gener al Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly . II. Follow each step carefully to ensure the proper assembly of this product. III. T wo people are recommended for ease in the assembly of this product.
Parts List.
Hardware List Long bolt Short bolt Spring door hinge Fixed door hinge U.
Screw cam bolts (B) into panel (2). Insert dowels (C) into slat (14). Attach slat (14) to panel (2) using cam bolts and dowels as guides. Insert cam locks (A) into slat (14) and tighten with a screwdriver .
Insert dowels (C) into panels (2,3,10). Screw cam bolts (B) into stand top (1). Attach door stopper (G) to stand top (1) using screws (H)..
Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (C) into legs (5,6,7,8). Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver .
Attach legs (7,8) to second panel (3) using cam bolts and dowels as guides. Insert cam locks (A) into panel (3) and tighten with a screwdriver . Attach support leg (1 1) to panel (2) using long bolts (E). Tighten long bolts (E) with wrench (F). Attach panel (10) to opposite side of panel (2) using long bolts (E).
Attach the assembly from the previous step to the leg assembly from Step 6 using cam bolts and dowels as guides. Insert cam locks (A) into panel (2) and tighten with a screwdriver . Attach the leg assembly from Step 7 to panel (2) using cam bolts and dowels as guides.
Insert cam locks (A) into the stand assembly . Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. T ighten cam locks (A) with a screwdriver .
.
Attach handles (N) to doors (12,13) using screws (P). Screw short bolts (K) into doors (12,13)..
Insert plastic pivots (Q) into stand top (1) and panel (2)..
Secure back panels (4) using plastic wedges (R) and screws (S). The thin lip of each plastic wedge (R) will fit between back panel (4) and the solid wood of the stand assembly .
An important point after buying a device Walker W44COSBL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Walker W44COSBL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Walker W44COSBL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Walker W44COSBL you will learn all the available features of the product, as well as information on its operation. The information that you get Walker W44COSBL will certainly help you make a decision on the purchase.
If you already are a holder of Walker W44COSBL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Walker W44COSBL.
However, one of the most important roles played by the user manual is to help in solving problems with Walker W44COSBL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Walker W44COSBL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
